On Sat, Feb 18, 2017 at 12:06 PM, Albert ARIBAUD <albert.arib...@free.fr>
> Hi Carl,
> Le Sat, 18 Feb 2017 09:31:19 -0600
> Carl Karsten <c...@nextdayvideo.com> a écrit:
> > dc10b is the dnsmasq server
> Ok; and I assume that you are running 'host' on another machine, right?
also running it on dc10b.
> > I am using a modified version of this:
> > https://anonscm.debian.org/git/debconf-video/ansible.git/
> Can't say it tells me much. :)
> > I haven't checked in the mods yet because things are still a little
> > wonky. git diff ... skimmed, don't see anything that would affect
> > dnsmasq.
> > juser@dc10b:~$ cat /etc/dnsmasq.d/local.conf
> > ## Ansible managed
> > interface=eth-local
> > domain=lca2017.lan
> > dhcp-range=10.20.1.10,10.20.1.254,6h
> > dhcp-option-force=210,/srv/tftp/
> > dhcp-boot=pxelinux.0
> > dhcp-authoritative
> > enable-tftp
> > tftp-root=/srv/tftp
> And what's the /etc/hosts?
juser@dc10b:~$ cat /etc/hosts
# The following lines are desirable for IPv6 capable hosts
::1 localhost ip6-localhost ip6-loopback
Note: that is current. I have been changing the dc10b line, but it should
be clear in my posts what it is when I show test results.
> > Hmm, on an openwtt ap running dnsmasq:
> > root@tpap:~# cat /etc/resolv.conf
> > search lan
> > nameserver 127.0.0.1
> > root@tpap:~# cat /etc/hosts
> > 127.0.0.1 localhost
> > root@tpap:~# nslookup tpap
> > Server: 127.0.0.1
> > Address 1: 127.0.0.1 localhost
> > Name: tpap
> > Address 1: 192.168.1.2 tpap.lan
> What's 'tpap' supposed to be?
so this install does what I would expect.
> Anyway, my guess: your dnsmasq server has its own name listed in
> its /etc/hosts with 127.0.1.1 as the matching IP,
> and your dnsmasq
> config does not contain option no-hosts,
> so your dnsmasq uses
> its /etc/hosts when resolving a name; ergo, it resolves its own name to
so if I set no-hosts, how does dnsmaq figure out how to resolve dc10b?
ore really, what should I be doing so that 'things work as I expect' ?
Dnsmasq-discuss mailing list