Hi, I have an RT-N56U (I'm using a Padavan firmware for some context) router with an isolated guest wifi setup for my IOT devices. This guest network is both AP clients and LAN isolated, which I confirmed to be true. I have the DNS set to pihole 192.168.1.100 for my entire network, but I'd like any clients that are connected to the guest wifi to use 188.8.131.52 since it's not possible for any of the guest clients to communicate with the pihole.
I've been able to do this by manually tagging all of my iot devices one by one with: dhcp-host=XX:XX:XX:XX:XX:XX,set:dnsoverride dhcp-option=tag:dnsoverride,option:dns-server,184.108.40.206 This works on any devices that I've tagged with dnsoverride, but it's host-dependent rather than interface dependent. I've confirmed that the 2.4GHz wifi interface is rai1 with ifconfig and based on the firmware docs: https://bitbucket.org/padavan/rt-n56u/wiki/EN/CommonTips#!what-are-the-existing-network-interfaces-transcript-naming-interfaces . I've tried the following without success - it seems like it gets ignored for any clients connecting to the guest network: - dhcp-option=tag:rai1,option:dns-server,220.127.116.11 - dhcp-option=interface:rai1,option:dns-server,18.104.22.168 - dhcp-option=rai1,option:dns-server,22.214.171.124 Is it not possible to set the dns server based on the interface? Thanks, Ian
_______________________________________________ Dnsmasq-discuss mailing list Dnsmasqemail@example.com http://lists.thekelleys.org.uk/mailman/listinfo/dnsmasq-discuss