Any help on how I can comply to '4.4' would be appriciated. On 12/21/2019 9:12 AM, john doe wrote: > On 12/21/2019 7:41 AM, john doe wrote: >> Thank you, Simon for your answer. >> >> On 12/20/2019 6:36 PM, Simon Kelley wrote: >>> On 18/12/2019 11:19, john doe wrote: >>>> On 12/18/2019 11:29 AM, Kurt H Maier wrote: >>>>> On Wed, Dec 18, 2019 at 08:46:22AM +0100, john doe wrote: >>>>>> Hi, >>>>>> >>>>>> I was wondering what is the state of (1) with regard to Dnsmasq? >>>>>> >>>>>> Any help is appriciated. >>>>>> >>>>>> 1) https://tools.ietf.org/html/rfc8375 >>>>> >>>>> It works. >>>>> >>>>> Are you looking for something in particular? >>>>> >>>> >>>> As far as I understand it, HNCP will automatically manage IPv4/6 and I'm >>>> not sure how Dnsmasq will come into play? >>>> >>>> As the RFC suggest, for my home network I will change to '.home.arpa'. >>>> >>>> Thanks for confirming that Dnsmasq works with '.home.arpa'. >>>> >>>> -- >>> >>> >>> To comply with 4.4 requires some configuration >>> >>> local=/home.arpa/ >>> >>> and, for section C >>> >>> server=/home.arpa/<IP-of-auth> >>> >> >> Okay, I'm at a lost on how to get this straight and would appriciate any >> help. >> >> If I look at (1) : >> >> "-S, --local, >> --server=[/[<domain>]/[domain/]][<ipaddr>[#<port>][@<source-ip>|<interface>[#<port>]]" >> >> I can group the above two lines as follow: >> >> local=/home.arpa/<IP-of-auth> >> >> Is that correct? >> >> >> >> I use dnsmasq on two different boxes, gateway is behind perimeterfirewall: >> - perimeterfirewall >> # Add local-only domains here, queries in these domains are answered >> # from /etc/dnsmasq-hosts.d or DHCP only. >> local=/london.home/ >> # Set the domain for dnsmasq >> domain=london.home >> # Set a different domain for a particular subnet >> domain=wired.london.home,172.19.100.0/24,local >> # Specify DHCP range with a tag >> dhcp-range=set:wired,172.19.100.200,static >> >> - gateway >> # Add local-only domains here, queries in these domains are answered >> # from /etc/dnsmasq-hosts.d or DHCP only. >> local=/vancouver.home/ >> # Set the domain for dnsmasq >> domain=vancouver.home >> # Set a different domain for a particular subnet >> domain=dmz.vancouver.home,172.19.150.0/24,local >> domain=wifi.vancouver.home,172.19.200.0/24,local >> # Specify DHCP range with a tag >> dhcp-range=set:dmz,172.19.150.200,172.19.150.253 >> dhcp-range=set:wifi,172.19.200.200,static >> >> >> With the exceptionof the above, both dnsmasq.conf files are identical. >> >> In your server line above, I don't understand what the '<IP-of-auth>' >> should be? >> >> I would'd like to understand this before I go ahead with changing >> '.home' to '.home.arpa'. >> Upstream DNS is handled by systemd-resolvd and the resolvconf package. >> >> Any help is welcome. >> >> >> 1) http://www.thekelleys.org.uk/dnsmasq/docs/dnsmasq-man.html >> > > Also From above: > > "Also permitted is a -S flag which gives a domain but no IP address; > this tells dnsmasq that a domain is local and it may answer queries from > /etc/hosts or DHCP but should never forward queries on that domain to > any upstream servers. --local is a synonym for --server to make > configuration files clearer in this case." > > If I understand the above correctly, there is no difference between > '--local' and '--server' but '-S' makes dnsmasq treate the domain as > 'local' and thus is different. > > Are '-S' and '--local' realy diffrent? > > In other words, what are the differences between '--local', '--server' > and '-S'. > > -- > John Doe > > _______________________________________________ > Dnsmasq-discuss mailing list > Dnsmasq-discuss@lists.thekelleys.org.uk > http://lists.thekelleys.org.uk/mailman/listinfo/dnsmasq-discuss >
-- John Doe _______________________________________________ Dnsmasq-discuss mailing list Dnsmasq-discuss@lists.thekelleys.org.uk http://lists.thekelleys.org.uk/mailman/listinfo/dnsmasq-discuss