Thanks, I'm reviewing them.
I added categories.
I added {{#translation:}} suffixes to the menu templates.
Today we discovered that we can't yet use the sidebar language list, so
we switched back to the old style. This means we have to keep adding the
<languages/> element at the top after all. The reason is that in the
sidebar, the English item will have a link ending in /en and visiting
this link will show broken menu templates. This will fortunately be
solved after this task is completed:
https://phabricator.wikimedia.org/T47096
This sort of breaking up of sentences should not be done, because not
all languages have the same rules for word order as English:
<translate>This</translate> [[Media:Create_named_range_with_macro.ods |
<translate>Calc spreadsheet</translate> ]] <translate>contains the above
LibreOffice Basic code.</translate>
Ilmari
On 11.1.2021 12.53, Steve Fanning wrote:
Hi Ilmari,
Thank you for the feedback.
I have added translation markups to all twelve of the new pages and
marked them for translation. I've also marked the index page for
translation.
Please let me know if you spot anything relating to translation that I
have implemented in a sub-optimal way.
Regards,
Steve
On 09/01/2021 20:05, Ilmari Lauhakangas wrote:
It looked fine, thanks for the work. I added {{#translation:}}
suffixes to the macro page links, so they will always point to the
pages in the relevant language.
Ilmari
On 9.1.2021 17.53, Steve Fanning wrote:
I have completed creating English versions of the wiki pages that
include the Basic macros from Chapter 13 of the Calc Guide.
The index page for these files can be found at
https://wiki.documentfoundation.org/Macros/Calc. I have added some
translation markups to this index page . However, I've never done
this before. Would it be possible for Ilmari (or somebody else with
the appropriate knowledge) to have a look at this page and advise if
any of these translation markups are inappropriate?
Thanks in advance.
Regards,
Steve
On 05/01/2021 16:35, Steve Fanning wrote:
Thanks Ilmari.
I expect there to be twelve of these pages. I plan to create all of
the pages first and then add the translation markups afterwards.
I will confirm via the email list when I am finished. Maybe you or
somebody else with suitable knowledge would give the pages a quick
check at that point, just to make sure that I have not done anything
wrong in terms of adding the translation markups.
The technical details of the pages shouldn't need much checking as
they are mostly copied directly from the published 7.0 Calc Guide.
Regards,
Steve
On 05/01/2021 06:56, Ilmari Lauhakangas wrote:
The translation needs to be prepared by hand according to these
instructions:
https://wiki.documentfoundation.org/TDF_Wiki/Multilingual#Content_with_global_focus
In this case it is a bit tedious as you ideally have to include
many snippets in the translation (while excluding the content and
markup that should remain untranslated). I guess the argument names
in the description section could be included in the translation.
You would also want to include every single comment in the example
code block.
Ilmari
On 4.1.2021 22.33, Steve Fanning wrote:
Thanks Ilmari,
I have created one of the pages at
https://wiki.documentfoundation.org/Macros/Calc/ba019. Do I need
to do anything to prepare it for translation?
Regards,
Steve
On 04/01/2021 11:09, Ilmari Lauhakangas wrote:
On 4.1.2021 12.54, Steve Fanning wrote:
Hi Ilmari,
Could you give me some advice with regards to the wiki please?
I am in the process of updating Chapter 13 of the Calc Guide to
change its emphasis away from macro programming. There are some
useful LibreOffice Basic macro code snippets which are to be
removed from the document, but I do not want to lose them
completely. Therefore, I propose to add them to the wiki – the
page at https://wiki.documentfoundation.org/Macros/Calc seems a
good place to start.
Two questions arise:
1. Can I view a list of all the pages currently in the
https://wiki.documentfoundation.org/Macros/Calc area?
https://wiki.documentfoundation.org/Special:PrefixIndex?prefix=Macros%2FCalc&namespace=0
2. What would be the best material for me to read to understand the
markup that should be included to format the code snippets
nicely?
I think we found that lang set to vbnet is the best for syntax
highlighting, so put your code inside a block like:
<syntaxhighlight lang="vbnet">
</syntaxhighlight>
Ilmari
--
To unsubscribe e-mail to: documentation+unsubscr...@global.libreoffice.org
Problems? https://www.libreoffice.org/get-help/mailing-lists/how-to-unsubscribe/
Posting guidelines + more: https://wiki.documentfoundation.org/Netiquette
List archive: https://listarchives.libreoffice.org/global/documentation/
Privacy Policy: https://www.documentfoundation.org/privacy