UPDATE ......No Replies Received I decided to parallel connect to the cigarette lighter wires with a rocker switch (w/ led light built in) mounted on the dash panel below the instrument cluster. Power to the cigarette lighter is fused to operate only when the ignition switch is on. The led strips are great especially when its dark out. Spectacular sight looking at the front of the car. In addition standing on either side of the car the lighted white led’s on the strips are very visible. This project turned out better than I anticipated. I’ll try to post some pics. Total cost just over $30. EJ >>>
From: mrejh Sent: Friday, August 31, 2012 5:16 PM To: [email protected] Subject: [dodge_intrepid] Alpena LED Strips I have a 2000 Intrepid and currently in process of mounting a pair of the Alpena "28" LED strips (2 - 14 inch self adhesive strips)on top of both headlight lens edge which will be just under the hood edge. For me a very convenient location as the LED strips light at a 90 degree angle, which would be in a forward direction. I'm trying to locate a 12 volt power source other than the parking light wire. Can anyone suggest a power source I can connect to that provides power only when the key is on? Any suggestions are appreciated. Thank you. EJ >>> [Non-text portions of this message have been removed] ------------------------------------ Web: <http://groups.yahoo.com/group/dodge_intrepid> Subscribe: <mailto://[email protected]> Unsubscribe: <mailto://[email protected]> Moderator: <mailto://[email protected]>Yahoo! Groups Links <*> To visit your group on the web, go to: http://groups.yahoo.com/group/dodge_intrepid/ <*> Your email settings: Individual Email | Traditional <*> To change settings online go to: http://groups.yahoo.com/group/dodge_intrepid/join (Yahoo! ID required) <*> To change settings via email: [email protected] [email protected] <*> To unsubscribe from this group, send an email to: [email protected] <*> Your use of Yahoo! Groups is subject to: http://docs.yahoo.com/info/terms/
