G'day All, As previously mentioned in the 3000hr emails the Jaycar endoscope (cat# QC-3371) needs heaps of light to be effective. We used a super bright button LED (Jaycar cat# ZD-0445) which did the job very well. The LED does need a heatsink. Drill appropriate small holes at the end end of a length of narrow aluminium flat bar then use lockwire to mount it with silicon paste. This will fit through a 12-14mm hole The LED needs 3.3 volts and the brightness drops off rapidly below this. We used 3 x 1.2v AA NMh rechargeables. I am not sure if 2 x 1.5v AA alkalines would quite get the LED to maximum brightness. You can also buy a switched battery holder pack from Jaycar. With this combo for around $65 you have a great way of inspecting hard to see places. cheers Rob
PO Box 129, Lawson, NSW, 2783. mobile 0429 493828 ............................................. --- On Tue, 11/12/12, Mrsoaring <[email protected]> wrote: From: Mrsoaring <[email protected]> Subject: [DOG mailing list] Hirchmann.B To: [email protected] Received: Tuesday, 11 December, 2012, 7:34 AM I finally have 5sets of special ball rod ends from Hirchmann for 3000hly(4undercarriage, 2elevator mount). R R Fisher here could not help as special order so I asked Christian Streifeneder in Germany and he places the order and it took 15 weeks to supply.The minimum order was 10 units thus I ordered 20 under cart rod ends. 3 sets are spoken for so 2 sets are for sale at cost and no gst was paid thanks to Christian. First in first severed and if 3000 hly is due soon I suggest it is a good insurance policy.Christian also got me ths ball rod end for base of rider at base of rudder of PIK20EIan m Sent from Samsung Mobile
