There is a falke which has a L2000 but would appear came with the flange that normally comes with the variable pitch prop. It appears to have an adapter to go from 2 position prop to fixed wooden prop. The standard prop with L2000 for Scheibe is 150 x90 but you can use 150 dia by 75 and this falke has that and it leaps off the ground.
I think I would prefer higher revs of 75.rather than the 90 pitch which may load engine up a bit too much. The adapter looks an expensive item. Ian McPhee +61 428847642 Box 657 Byron Bay NSW 2481 On Thu, 29 Nov. 2018, 08:08 Rob Thompson <[email protected] wrote: > Hi Angel, > The torque of the prop flange bolt is in the "Table of Torques" near the > end of the maintenance manual. > It is very high and you will need to lock the flange with a special tool. > The heavy maintenance manual does not seem to be on the Limbach web site > but I would recommend that you don't do anything without it. > I have no experience with fixed pitch props on the Dimona. > > regards > Rob > > Rob Thompson > 0429 493 828 > (Please note that my new email address is [email protected]) > > > On Thu, Nov 29, 2018 at 3:16 AM Angel Jimenez Martin < > [email protected]> wrote: > >> Hello everyone, >> >> In an accident I broke the two blades of my Hoffmann propeller. I have >> searched to buy two blades of second hand but I have not found any. >> >> Due to the high price of the repair by Hoffmann, including two new blades, I >> have decided to put a fixed pitch propeller. >> >> It seems that the measurements would be between 150 cm in diameter by 90 or >> 75 of pitch. >> >> There is someone who can tell me what would be the best pitch. >> >> >> On another topic, could someone tell me the tightening torque of the >> fastening piece (Befestigungsschraube) num. 1 in the annex. >> >> Best regards. >> >> Angel >> >> >> >> >> >> <https://www.avast.com/sig-email?utm_medium=email&utm_source=link&utm_campaign=sig-email&utm_content=webmail> >> Libre >> de virus. www.avast.com >> <https://www.avast.com/sig-email?utm_medium=email&utm_source=link&utm_campaign=sig-email&utm_content=webmail> >> <#m_1057680254640276011_m_-1409762563900751553_DAB4FAD8-2DD7-40BB-A1B8-4E2AA1F9FDF2> >> >> --------------------------------------------------------------------- >> You are subscribed to the Dimona Owners Group mailing list. >> To unsubscribe, send email to: [email protected] > >
