Garth N. Wells wrote:
> Alessio Quaglino wrote:
>
>>>> Alessio Quaglino wrote:
>>>>
>>>>> I'd like to turn off the progress bars for the assembly, I'm trying
>>>>> something like this:
>>>>>
>>>>> set("OutputDestination", "silent");
>>>>> assembler.assemble(load, L, mesh);
>>>>> set("OutputDestination", "terminal");
>>>>>
>>>>> but it doesn't seem to work. Do I forget something?
>>>>>
>>>>> Thanks,
>>>>> Alessio Quaglino
>>>>>
>>>> It should be "output destination" (not "OutputDestination").
>>>>
>>>> It should also work setting "debug level" to -1.
>>>>
>>>> Perhaps we should increase the debug level for progress bars to 1. They
>>>> are currently at 0 and will thus be printed on the default debug level
>>>> which is 0. Thoughts?
>>>>
>>>> /Anders
>>>>
>>> I've tried:
>>>
>>> set("output destination", "silent");
>>> assembler.assemble(load, L, mesh);
>>> set("output destination", "terminal");
>>>
>>> but the progress bars are still printed out. I think it's a good idea to
>>> move them to level 1.
>>>
>>> Alessio
>>>
>> Apart from this, I've got another problem with the output. It seems that
>> for both uBlas matrices and vectors disp() prints only a short block of
>> each row of the matrix or a short block of the whole vector. The output
>> for a matrix looks like this (first and second rows):
>>
>> | (0, 0, 3.66e-01) (0, 1, -8.33e-03) (0, 11, -4.17e-03) (0, 12, -5.69e-06)
>> (0, 121, -2.67e-01) (0, 122, 5.18e-07) (0, 132, 6.70e-07) (0, 133,
>> 4.98e-06) (0, 242, -5.99e-07) (0, 243, 1.02e-07) (0, 253, 2.08e-03) (0,
>> 254, -2.08e-03) (0, 363, 6.00e-07) (0, 36
>>
>> | (1, 0, -8.33e-03) (1, 1, 5.38e-01) (1, 2, -8.33e-03) (1, 12, -6.25e-03)
>> (1, 13, -2.21e-05) (1, 122, -4.00e-01) (1, 123, 6.08e-06) (1, 133,
>> 8.36e-06) (1, 134, 5.75e-06) (1, 242, 2.08e-03) (1, 243, -2.08e-03) (1,
>> 244, -2.72e-07) (1, 254, 2.09e-03) (1, 255
>>
>>
>
> This problem was introduced by the new log system. It cuts things off
> after 256 character (which is set by DOFLIN_LINELENGTH). Anyone know how
> to fix this?
>
> Garth
>
>
I couldn't tell if this ever got discussed again, but if there is a fix
or a work around, I'd like to hear it, too.
Jake
>> Alessio
>>
>>
>>
>> _______________________________________________
>> DOLFIN-dev mailing list
>> [email protected]
>> http://www.fenics.org/mailman/listinfo/dolfin-dev
>>
>>
>
> _______________________________________________
> DOLFIN-dev mailing list
> [email protected]
> http://www.fenics.org/mailman/listinfo/dolfin-dev
>
>
>
_______________________________________________
DOLFIN-dev mailing list
[email protected]
http://www.fenics.org/mailman/listinfo/dolfin-dev
