Hi, I need a dead-simple midi footswitch for my v-drums, but I can't find one cheaper than $80 online! Since I have an old 1/4" analog footswitch just lying around, it seems a no-brainer half-hour project to connect a $20 teensy to a 1/4" female jack, use the USB->MIDI feature of Teensyduino to load a simple sketch and turn my footswitch into a 1-note USB/MIDI keyboard, and spend the $60 I saved on rock & roll things like … um … extra sticks, or something. Right?
The only thing I'm not sure of is what case to put it in. An altoids tin seems like a vast waste of space. Ideally I'd find some small, rugged plastic or metal cylinder not much bigger than the teensy itself, with the teensy's USB port on one end and the 1/4" jack on the other, so the whole thing resembled a wart on a cord. What are your favorite cases for teensy projects where tinyness is golden? -mykle- _______________________________________________ dorkbotpdx-blabber mailing list [email protected] http://music.columbia.edu/mailman/listinfo/dorkbotpdx-blabber
