Description (copied from a surplus sale site): The 1360S contains four 9-to-1 switches which can be cascaded to provide two 17-to-1 switches; a 25-to-1 switch and a 9-to-1 switch; or a 33-to-1 switch. The 1360S has a signal bandwidth of 250 MHz, make/break time in all configurations is <1 ms. The switches in the 1360S can also be ganged together to provide simultaneous and synchronized multiplexing of several groups of signals. The 1360S is housed in a 5.75H x 19W rackmount chassis. Photos (also not mine): http://tinyurl.com/pwlpsbo
I am almost certain that these are an all 50-ohm system. Signal connectors are BNC. Programmer (Tektronix 1360P) NOT included, some reverse engineering would be required to operate. Purchased surplus about 10 years ago but never used or tested. These were evidently used to switch instrument inputs as part of an automated test system. Radio fans might use one to select antennas. I have no documentation. Email me if you want to pick up one or both units in Gresham no later than January 18. Jack Powers _______________________________________________ dorkbotpdx-blabber mailing list [email protected] http://music.columbia.edu/mailman/listinfo/dorkbotpdx-blabber
