On 30/06/12 22:32, Clive A Wills wrote:
Hi All
I'll be at the meeting on Tuesday night and will have some questions
on networking (again!).
I've just replaced my old router with a Netgear DGND 3700, all working
fine except for the print server (with HP LJ6P attached). Was all
working before but can not 'see' the server on the router. Tried to
find with the old IP but gateway etc has changed. Put IP address into
Firefox but not found. Reset print server to factory defaults but
srill not seen.
Question: is there a command to find what is connected to the ports on
the back of the router?
Tried also with Print server connect to another laptops eth0 (no
network connected) but still no joy (leads changed also).
Will bring print server to meeting if not cured by then.
Have you done a scan of your ip range to see if the print server has
picked up an IP via dhcp?? Also check what ever device you have on your
network that acts as the dhcp server.
Tim
--
Next meeting: Bournemouth, Tuesday 2012-07-03 20:00
Meets, Mailing list, IRC, LinkedIn, ... http://dorset.lug.org.uk/
New thread on mailing list: mailto:[email protected]
How to Report Bugs Effectively: http://goo.gl/4Xue
