Am 17.11.2010 10:14, schrieb Thomas Leuxner: > On Wed, Nov 17, 2010 at 09:57:59AM +0100, Robert Schetterer wrote: >> i think there can only be defaults if all parameters are default >> ( at a new clean install from scratch ) > > These are unset defaults as far as I can tell. As with all defaults they > should work out of the box. They are *not* overriden by specific custom > values. Well, actually they are now, because of not being set in the first > instance.
hm i have i.e # If you set service_count=0, you probably need to grow this. #vsz_limit = 64M in 10-master.conf so whatever there is/was a warning in some default conf having your eyes on this parameter so i stay there can only be starting defaults at clean new setups and they might fail too, i.e if you have very small resources so give warning is the only chance i see but no flame , i changed so much that i havent any idea whats now is default exactly > >> why no use something like i.e default_vsz_limit = 256M ? >> instead of using seperate entries > > Personally I think this is a form of wasting resources. Why would one > allocate 256M to something that was previously set to 0B? Would it do > any good at all? It may be convient to do so, but it may not be very > effective... sorry i have enough resources so i dont care unless i see a warning, basicly i trust in Timos code giving the right warnings but good that Timo mostly answers if you ask detailed describe your resources and he or others might give recomands testing your setup with different setups might also help find out for you, whats best at your site perhaps some basic resource examples should be in the wiki > > Thomas -- Best Regards MfG Robert Schetterer Germany/Munich/Bavaria
