Hello,
I am trying to set up Dovecot 2.0.9 on Fedora 14. The problem I would like
to ask for resolution is that IMAP is not working when connecting to the
server from another network.
More precisely:
- POP3 is working entirely OK,
- IMAP is working OK when clients are connecting using local network
addresses, like 192.168.0.100,
- when a client connects from outside, thus using remote IP address, or
even from the server itself using the remote IP address of the server, the
following happens: the client correctly connects, but the server sends no
greeting (neither the configured login_greeting nor the server IMAP
capabilities) and does not respond to the commands. In the server log, I
get the following record a while after trying to connect (and actually
trying to login):
Jul 08 23:24:16 imap-login: Info: Disconnected: Inactivity (no auth
attempts): rip=<remote-server-address>, lip=192.168.0.100
Both routing and firewall are OK. The client really connects to dovecot
(hence the log message), as seen from a telnet session:
Trying a.b.c.d...
Connected to example.tld (a.b.c.d).
Escape character is '^]'.
(and then nothing else)
The most confusing for me is the fact that POP3 is configured quite the
same and works fine, as well as IMAP on the local network. I tried to
change address in the inet_listener imap configuration, but if a wrong
address setting was the cause, the client would not get connected at all.
As I have spent a pretty long time unsuccessfully searching for a cause, I
am asking for some help.
Thanks for your time,
Ondrej Bouda
dovecot -n output follows:
# 2.0.9: /etc/dovecot/dovecot.conf
# OS: Linux 2.6.35.11-83.fc14.x86_64 x86_64 Fedora release 14 (Laughlin)
ext4
auth_mechanisms = plain login cram-md5 digest-md5 ntlm
disable_plaintext_auth = no
first_valid_gid = 502
first_valid_uid = 502
last_valid_gid = 502
last_valid_uid = 502
log_path = /var/log/dovecot
login_greeting = Welcome
mail_location = maildir:/var/mail/virtual/%d/%n
passdb {
args = scheme=plain username_format=%u /etc/dovecot/passwd
driver = passwd-file
}
protocols = imap pop3
service auth {
unix_listener /var/spool/postfix/private/auth {
group = postfix
mode = 0660
user = postfix
}
user = dovecot-auth
}
service imap-login {
inet_listener imap {
address = *
port = 143
}
}
service pop3-login {
inet_listener pop3 {
address = *
port = 110
}
}
ssl = no
userdb {
args = username_format=%u /etc/dovecot/passwd
driver = passwd-file
}
protocol pop3 {
pop3_client_workarounds = outlook-no-nuls oe-ns-eoh
pop3_uidl_format = %08Xu%08Xv
}
