hi
> I don't know if this is related but I also get quite a few of these error
> messages:
>
> Jan 31 14:10:46 auth: Warning: auth client 0 disconnected with 1 pending
> requests: Connection reset by peer
my interpretation:
a) you have a very very bz network ... the other end cannot respond to incoming
requests
even if your network is NOT bz, eg, no collision blinking on your
hubs/switches,
you are still having network problems
b) if all of your dovecot tests is on one host ... disconnect it from the
network
and see if dovecot's auth finishes its tasks
c) to clean up your network ...
- use switches ... not hubs .... even inexpensive netgear switches is
good enuff
- use good 3-6' cat6e cables ... we'll assume the bldg's wiring is done
to bldg specs
- my guess, you're probably having cabling problems )
- separate slow devices from faster devices
eg. separate printers onto its own network with a switch
in between printers and everybody else
- separate 10/100 devices from gigE devices ... do not mix them up on
the same switch/hub
c ya
alvin
> Jan 31 14:13:20 auth: Warning: auth client 0 disconnected with 1 pending
> requests: Connection reset by peer
> Jan 31 14:13:20 auth: Warning: auth client 0 disconnected with 2 pending
> requests: Connection reset by peer
> Jan 31 14:13:22 auth: Warning: auth client 0 disconnected with 2 pending
> requests: EOF
> Jan 31 14:13:26 auth: Warning: auth client 0 disconnected with 1 pending
> requests: Connection reset by peer
>
> maybe around 20-30 per day.
>
