Hm :/ It is saying the same again. That I am not allowed to merge anything.
Damla
2014-09-16 15:25 GMT+02:00 Zieris, Franz <franz.zie...@fu-berlin.de>:
> Alright, we are getting there.
>
> I gave you the “push merge commit” right for your development branch, so
> the same command should work now.
>
>
>
> Franz
>
>
>
> *From:* Damla Durmaz [mailto:ddurma...@gmail.com]
> *Sent:* Tuesday, September 16, 2014 3:19 PM
>
> *To:* Zieris, Franz
> *Cc:* dpp-devel@lists.sourceforge.net
> *Subject:* Re: [DPP-Devel] Commit message longer than 65 characters?
>
>
>
> No problem. Now, git says that it cannot merge due to permissions:
>
>
>
> Damlas-MacBook-Air-2:saros damlisch$ git push origin
> HEAD:refs/for/development/actionAwareness
>
> Counting objects: 170, done.
>
> Delta compression using up to 4 threads.
>
> Compressing objects: 100% (46/46), done.
>
> Writing objects: 100% (66/66), 9.46 KiB | 0 bytes/s, done.
>
> Total 66 (delta 37), reused 0 (delta 0)
>
> remote: Resolving deltas: 100% (37/37)
>
> remote: Processing changes: refs: 1, done
>
> To ssh://dil...@saros-build.imp.fu-berlin.de:29418/saros.git
>
> ! [remote rejected] HEAD -> refs/for/development/actionAwareness (you are
> not allowed to upload merges)
>
> error: failed to push some refs to 'ssh://
> dil...@saros-build.imp.fu-berlin.de:29418/saros.git'
>
> Damlas-MacBook-Air-2:saros damlisch$
>
>
>
> I need merge commit permissions. Are these branch specific or for the
> whole saros project?
>
>
>
> Cheers,
>
> Damla
>
>
>
> 2014-09-16 15:13 GMT+02:00 Zieris, Franz <franz.zie...@fu-berlin.de>:
>
> Sorry ...
>
>
>
> > git push origin refs/for/development/actionAwareness
>
>
>
> should be
>
>
>
> > git push origin HEAD:refs/for/development/actionAwareness
>
>
>
> The error message basically says “locally, there is nothing like
> ‘refs/for/development/actionAwareness’, so I don’t know what you want me to
> push”.
>
>
>
> Franz
>
>
>
> *From:* Damla Durmaz [mailto:ddurma...@gmail.com]
> *Sent:* Tuesday, September 16, 2014 3:09 PM
>
>
> *To:* Zieris, Franz
> *Cc:* dpp-devel@lists.sourceforge.net
> *Subject:* Re: [DPP-Devel] Commit message longer than 65 characters?
>
>
>
> Ups, I forgot to attach the file. Here it is :)
>
>
>
> 2014-09-16 14:56 GMT+02:00 Damla Durmaz <ddurma...@gmail.com>:
>
> Hi Franz,
>
>
>
> It didn't work :(. I will describe my steps in detail, so that you can
> see, where the problems may be. At the beginning, I just have the master
> branch checked out and nothing committed, changed and so on. Everything is
> clean. Then:
>
>
>
> 1) I pull the master
>
> 2) I check out development/actionAwareness
>
> 3) I pull development/actionAwareness
>
> 4) git checkout development/actionAwareness
>
> 5) git log --graph --decorate --oneline master development/actionAwareness
> --> was like you described
>
> 6) git merge master -m "[BUILD] Merge master into
> development/actionAwareness" --> I had conflicts
>
> 7) I resolved the conflicts and made a commit with the appropriate message
> from above
>
> 8) git cherry-pick change/1788/7 --> I had conflicts. I solved them,
> continued the cherry pick
>
> 9) git push origin refs/for/development/actionAwareness --> Won't work,
> since it says that it doesn't match anything
>
>
>
> I attached the output of my console from the step when I cherry picked.
> The log shows me that I correctly merged in the master branch, but 'git
> status' says that I am 123 commits back. I made a pull but this didn't work
> either.
>
>
>
> Damla
>
>
>
> 2014-09-16 11:07 GMT+02:00 Zieris, Franz <franz.zie...@fu-berlin.de>:
>
>
>
> Hi Damla,
>
>
>
> Hm, maybe I got your current repository state wrong.
>
>
>
> The full procedure is this (assuming you have the two local branches
> “master” and “development/actionAwareness”):
>
> · Do your local branches “master” and
> “development/actionAwareness” contain any not-yet-public commits?
>
> o If no: Pull the master and the development/actionAwareness branch
> from Gerrit. This will result in a fast-forward.
>
> o If yes: Just fetch the master and the development/actionAwareness
> branch from Gerrit. Checkout your local master branch, decide whether the
> not-yet-public commits are worth keeping (if so, “git branch oldMaster”)
> and then “git reset --hard origin/master”. Repeat for the development
> branch.
>
> · git checkout development/actionAwareness
>
> · git log --graph --decorate --oneline master
> development/actionAwareness
>
>
>
> You can use the up/down arrows for scrolling (it’s been a while since the
> dev branch did branch off).
>
> If you see a long master branch and a tiny dev branch attached to its
> trunk, then you can continue. Otherwise, please show me the output.
>
>
>
> · git merge master -m "[BUILD] Merge master into
> development/actionAwareness"
>
> · git cherry-pick change/1788/7
>
> · git push origin refs/for/development/actionAwareness
>
>
>
> Franz
>
>
>
>
>
> *From:* Damla Durmaz [mailto:ddurma...@gmail.com]
> *Sent:* Tuesday, September 16, 2014 12:01 AM
> *To:* Zieris, Franz
> *Cc:* dpp-devel@lists.sourceforge.net
> *Subject:* Re: [DPP-Devel] Commit message longer than 65 characters?
>
>
>
> Hi Franz,
>
>
>
> Thank you for your answer. I tried out the steps on the workspace state
> like in the screenshot. As I executed the third step
>
>
>
> --> git merge master -m “[BUILD] Merge master into
> development/actionAwareness”
>
>
>
> I got the message
>
>
>
> --> merge: Merge - not something we can merge
>
>
>
> What does this mean?
>
>
>
> Damla
>
>
>
> 2014-09-15 21:57 GMT+02:00 Franz Zieris <franz.zie...@fu-berlin.de>:
>
> Hi Damla,
>
>
>
> There are actually two problems: The length of the commit’s short message
> is a minor one (Gerrit says “W” for warning) and does not affect the
> “pushability” of your patch. The actual problem is that you created a new
> version/patch set of change 1572, which Gerrit won’t accept since this
> patch is already closed.
>
>
>
> The cause for this is probably that you forgot that you are developing
> your feature on a separate branch. The parent change 1572 is already
> submitted to that branch, but it is not part of the master branch. You
> should merge the current master into your development branch and then apply
> your most recent version of 1788 to that state.
>
>
>
> One way to achieve this (based on your screenshot):
>
> * git fetch origin development/actionAwareness
>
> * git checkout -B actionAwareness origin/development/actionAwareness
>
> * git merge master -m “[BUILD] Merge master into
> development/actionAwareness”
>
> * git cherry-pick change/1788/7
>
> * git push origin refs/for/development/actionAwareness
>
>
>
> Refer to the Git manual if you have any questions regarding these commands
> (http://git-scm.com/docs) or just ask here on the mailing list.
>
>
>
> Franz
>
>
>
> *From:* Damla Durmaz [mailto:ddurma...@gmail.com]
> *Sent:* Monday, September 15, 2014 9:19 PM
> *To:* dpp-devel@lists.sourceforge.net
> *Subject:* [DPP-Devel] Commit message longer than 65 characters?
>
>
>
> Dear Saros developers,
>
>
>
> I am struggling with git and don't know how to get along with the
> following situation:
>
>
>
> I have my patch 1788 [1] and wanted to rebase it against master, because
> it is a bit...old.... Therefore, I pulled the newest master branch and
> rebased against the local master branch, made some changes, needed for the
> rebase and then committed everything. As I wanted to push, I got the
> message in the screenshot below, thus that the commit message is too long.
> But the reject message refers to the parent of patch 1788, which is already
> merged.
>
>
>
> What am I doing wrong?
>
>
>
> Cheers,
>
> Damla
>
>
>
> [1] http://saros-build.imp.fu-berlin.de/gerrit/#/c/1788/7
>
>
>
>
>
>
>
>
>
------------------------------------------------------------------------------
Want excitement?
Manually upgrade your production database.
When you want reliability, choose Perforce.
Perforce version control. Predictably reliable.
http://pubads.g.doubleclick.net/gampad/clk?id=157508191&iu=/4140/ostg.clktrk
_______________________________________________
DPP-Devel mailing list
DPP-Devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/dpp-devel
