Kevin......What epoxy did you use for the layups.....I'm just trying to
find out since i will have to do some touch up and see if Poly Fiber is
compatible with Easypoxy and safety poxy....
Thx
> ----------
> From: Kevin & Valerie Smith[SMTP:[EMAIL PROTECTED]]
> Reply To: [EMAIL PROTECTED]
> Sent: Tuesday, June 02, 1998 8:55 PM
> To: [EMAIL PROTECTED]
> Subject: Re: DFLY: Polyfiber's composite fill/finish products
>
> At 07:09 PM 6/2/98 -0500, you wrote:
> >Has anyone got any experience with SmoothPrime, or SilverShield from
> >http://www.polyfiber.com ?
> >
> >They are made of waterborne urethane and can be rolled or sprayed on.
> >Looks pretty good.
>
> I'm using System 3 water reducable epoxy filler primer and it seems to
> be
> working well. I've done my filling with system 3 epoxy and
> microballoons and
> will finish with system 3 topcoat. All the products are made to work
> with
> each other so I should have a great bond on the paint.
> The primer thins and cleans up with water, it fills the weave great w/
> no
> pin holes and sands easily. I've been rolling it on in my basement
> with no
> complaints about fumes from the Wife.
>
> Kevin S.
> Dragonfly MK11H
>
> ----------------------------------------------------------------------
> -------
> dragonlist is hosted courtesy of Interstice Inc., a provider of
> reasonably
> priced virtual domain hosting for the world, and dedicated circuit and
> dialup for Silicon Valley. http://www.interstice.com (408)
> 369-4490
>
-----------------------------------------------------------------------------
dragonlist is hosted courtesy of Interstice Inc., a provider of reasonably
priced virtual domain hosting for the world, and dedicated circuit and
dialup for Silicon Valley. http://www.interstice.com (408) 369-4490
