I have a low serial number R4C and a low serial number T4XC that I used together until the low voltage supply in the R4C lost a section of electrolytic. It took a while to get around to fixing it but now that it is fixed I find that the transmitter and receiver do not track in transceive. It is like I need to adjust C61 in the receiver except that there is no trimmer cap in the R4C to net them together like the R4B had. They are off by 200 hz or more. They did track prior to the electrolytic repair. I primarily transceive to the transmitter with a crystal controlling the transmitter but it does not matter whether I am crystal controlling or vfo controlling they just do not track.
Can anyone suggest a reason and place to start looking to fix this problem? Thank you. Jim Pruitt ---------------------------------------------------------------------- Submissions: [EMAIL PROTECTED] Subscribe: [EMAIL PROTECTED] - subscribe drakelist in body Unsubscribe: [EMAIL PROTECTED] - unsubscribe drakelist in body Hopelessly Lost: [EMAIL PROTECTED] - help in body of message Brought to you courtesy of TLCHost.net http://www.tlchost.net ----------------------------------------------------------------------
