Richard - It's not necessary to remove the feet from the cabinet!
There are six screws on the bottom of the case. Remove these, and the tuner will come out from the rear. There is also an internal cover with another 14 screws to remove before you get access to the components. That being said, it's not easy (generally) to get it out!! The fit is EXTREMELY tight, and requires some patience (and sometimes a hammer!) to get it to come out. Best way I have found is to loop your forefingers around the front feet for leverage and then press on the main tuning knobs with your thumbs. The good news is that once you get past the first two or three inches it will slide the rest of the way out. If you find a better way, let us know! 73, Garey - K4OAH Atlanta ---------------------------------------------------------------------- Submissions: [EMAIL PROTECTED] Subscribe: [EMAIL PROTECTED] - subscribe drakelist in body Unsubscribe: [EMAIL PROTECTED] - unsubscribe drakelist in body Hopelessly Lost: [EMAIL PROTECTED] - help in body of message Brought to you courtesy of TLCHost.net http://www.tlchost.net ----------------------------------------------------------------------
