TVI filters For Sale: Drake TV-1000-LP Low pass filter for the transmitter This is the filter that may also be used on the low end of six meters, as well as HF. It is good for 1000 W below 30 MHz, and about 200 W up to 52 MHz. It is in very nice shape, with the copper is still nice and shiny. $ 35
E F Johnson low pass filter 52 ohms impedance, Catalog number 250-20. This is the cylindrical filter, with an SO-239 connector on each end. There is also a variable cap on each end, for precise adjustment to cure your particular TVI problem. $30 B & W 425 "antique" low pass filter I know most people are not going to think that a B & W 425 low pass filter is that old, but this one is. It appears that the case is made of copper, or at least copper plated, and then painted. There are just enough of the paint flakes coming off to see the copper underneath. The weight of this filter is about twice that of the more modern B & W 425 filters. In case any one does not know, the 425 is rated to take full legal power, and cuts off just above 10 meters. $30. TVI filter, made by Communications Power, Inc in the USA. This appears to be a bandpass filter for use on 10 (or 11) meters, and is rated at 600 watts. It has provisions for tuning the input and output for maximum TVI reduction. SO-239 connector on each end. $ 30 Prices do not include shipping from Florida. Thanks. 73, Ken, W8EK Ken Simpson E-mail to [EMAIL PROTECTED] or [EMAIL PROTECTED] Voice Phone (352) 732-8400 ---------------------------------------------------------------------- Submissions: [EMAIL PROTECTED] Subscribe: [EMAIL PROTECTED] - subscribe drakelist in body Unsubscribe: [EMAIL PROTECTED] - unsubscribe drakelist in body Hopelessly Lost: [EMAIL PROTECTED] - help in body of message Brought to you courtesy of TLCHost.net http://www.tlchost.net/ ----------------------------------------------------------------------
