No one said that the installation instructions from Sherwood Engineering
would be easy to follow but I've run into a problem for which I can find no
answer. Of course, everyone is at Dayton (but me), so I thought I'd ask the
group for some help.

Installing a Sherwood four filter switch kit in an R-4C
-----------------------------------
Wiring the SSB board: (Page 3, latest version, DC Connections)
#1. The instructions say to attach a 2 foot wire to the SSB filter board pad
labeled BLUE and run it through the center cable-harness cutout, for a later
attachment. There is no pad labeled BLUE, although I was able to figure this
one out by following the schematic of the board for which there was a "Blue"
connection, supplying power to the two filter-switching relays.

#2. The instructions say to attach a 2 foot wire to the SSB board pad
labeled +12V. There is no pad labeled +12V. The schematic diagram of the SSB
filter board shows no such +12V connection and indeed shows only the
connection indicated in step #1 which appears to be the same as in step #2.

#3. Wire the board to a +12V source near the R-4C accessory plug. No mention
of the blue wire or which wire to connect to the +12V source... although
+12V would seem logical, if there were such a wire. Of course, attaching the
BLUE wire to the +12V source would activate the relays locking them
permanently in the closed position.

No doubt, when installing the filter-switch assembly, all this will be
explained, (one should hope). I'll continue to read on, but if there is
someone who has some experience with this and might be able to shed some
light on the installation, I would appreciate hearing from them.

Best regards;
Gene

W5DDW
Gene McCalmont
270 Oakridge Road
Argyle Texas 76226

----------------------------------------------------------------------
Submissions:        [EMAIL PROTECTED]
Subscribe:          [EMAIL PROTECTED] - subscribe drakelist in body
Unsubscribe:        [EMAIL PROTECTED] - unsubscribe drakelist in body
Hopelessly Lost:    [EMAIL PROTECTED] - help in body of message
Brought to you courtesy of TLCHost.net  http://www.tlchost.net/
----------------------------------------------------------------------

Reply via email to