<[EMAIL PROTECTED]> made an utterence to the drakelist gang ---------------------------------------------------------------------- I have traced the mixer signals to a board next to to T6 and V3 the signal comes out of T6 into this board and then out of the board to V3 and V4. The board has two toridal inductors a trimmer capacitor and a fixed capacitor. The band switch shaft goes through a hole in this board.
The signal from T6 on my scope looks good and clean and in transmit X-CW mode I can see it vary with the transmit gain pot. At the inputs to V3 and V4 the signal looks distorted and is fixed. I can't see that this should be a normal circuit reaction? I also can't find the board or it's components on the schematic or photos for the TR-4 or TR-4C. Is anyone familiar with this board and what it does and how it is suppose to work? Matt K1MCN/AFA1KM ---------------------------------------------------------------------- On Behalf of <[EMAIL PROTECTED]> Submissions: [email protected] Unsubscribe: [EMAIL PROTECTED] - unsubscribe drakelist in body Hopelessly Lost: [EMAIL PROTECTED] - help in body of message Zerobeat Web Page: http://www.zerobeat.net Brought to you courtesy of TLCHost.net http://www.tlchost.net/ ----------------------------------------------------------------------
