"Lars E. Pettersson" <[EMAIL PROTECTED]> made an utterance to the drakelist gang ---------------------------------------------------------------------- Hi Russ!
Forgot to answer this. On 06/06/2005 03:47 PM, Russ Hines wrote: > to measure the level at EXT ANT while in transmit. I'll guess the > reason you get 0dBm is because of leakage through the series UM9401 PIN > diodes. In transmit, they're biased off, but there's I think 1/2 volt > or something on the anodes. They are actually forward biased, so that path is "on". By activating PA disable on the accessory jack you also disables the T/R relay, thereby setting +13.6R on all the time, (and also the mute signal on the accessory jack is unmuted.) An interesting setup indeed :-) Thanks for adding the note about the wire inside the cabinet connecting EXT ANT and EXT RX. Forgot to mention that... 73 de Lars, sm6rpz -- Lars E. Pettersson <[EMAIL PROTECTED]> http://www.sm6rpz.se/ ---------------------------------------------------------------------- On Behalf of "Lars E. Pettersson" <[EMAIL PROTECTED]> Submissions: [email protected] Unsubscribe: [EMAIL PROTECTED] - unsubscribe drakelist in body Hopelessly Lost: [EMAIL PROTECTED] - help in body of message Zerobeat Web Page: http://www.zerobeat.net Brought to you courtesy of TLCHost.net http://www.tlchost.net/ ----------------------------------------------------------------------
