"Ronald Baker" <[EMAIL PROTECTED]> made an utterance to the drakelist gang ---------------------------------------------------------------------- Paul, Make sure the 75S1 receiver function switch is in the "STBY" position. If its in the "OPR" position the receiver does not mute.
Ron Ron Baker / WB4HFN Visit my Website: www.wb4hfn.com Vintage Drake & Collins -----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Paul Solek Sent: Sunday, July 31, 2005 12:28 PM To: drakelist@www.zerobeat.net Subject: [drakelist] External receiver use. I have a TR4 Serial number 19419, works great. However, I would like to use a Collins 75S-1 receiver with the TR4. When I connect the receiver mute and antenna to the 75S-1, I get feedback, the receiver is not being muted. Yes, I am moving the slide switch to Receiver. There is also a panel on the rear of the TR4 that looks to be a factory mod. The panel has the following RCA plugs; O O O O EXT RCVR HF HF OUT MUTE RCVR ANT O O A B PA DIS I have connected the 75S-1 to both HF rcvr and HF ant with the same results, feedback. Has anyone used the 75S-1 receiver with a TR4/TR4C? And, how was it connected. Also, does anyone know anything about the apparent white wire factory mod? Paul There's no point in being grown up if you can't be childish sometimes. Doctor Who ---------------------------------------------------------------------- On Behalf of "Ronald Baker" <[EMAIL PROTECTED]> Submissions: drakelist@www.zerobeat.net Unsubscribe: [EMAIL PROTECTED] - unsubscribe drakelist in body Hopelessly Lost: [EMAIL PROTECTED] - help in body of message Zerobeat Web Page: http://www.zerobeat.net Brought to you courtesy of TLCHost.net http://www.tlchost.net/ ----------------------------------------------------------------------
