"Gerry" <[EMAIL PROTECTED]> made an utterance to the drakelist gang ---------------------------------------------------------------------- I might be wrong but I don't think you'll find them. What you can do is take a 7 pin tube socket and solder bus wire into the pin sockets and cut them to length. The tube socket lugs which are now up instead of down can be used to solder jumper wires or whatever else you desire.
-----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Bill Jackson Sent: Friday, November 18, 2005 8:01 AM To: drakelist Subject: [drakelist] Plug for R-4C Noise Blanker Socket "Bill Jackson" <[EMAIL PROTECTED]> made an utterance to the drakelist gang ---------------------------------------------------------------------- Greetings, I'm looking for a source and ordering reference for the 7-pin plug containing shorting straps that plugs into the noise blanker socket on the R-4C. Thanks! 73 de Bill, K9RZ ---------------------------------------------------------------------- Submissions: [email protected] Unsubscribe: [EMAIL PROTECTED] - unsubscribe drakelist in body Hopelessly Lost: [EMAIL PROTECTED] - help in body of message Zerobeat Web Page: www.zerobeat.net - sponsored by www.tlchost.net ---------------------------------------------------------------------- ---------------------------------------------------------------------- Submissions: [email protected] Unsubscribe: [EMAIL PROTECTED] - unsubscribe drakelist in body Hopelessly Lost: [EMAIL PROTECTED] - help in body of message Zerobeat Web Page: www.zerobeat.net - sponsored by www.tlchost.net ----------------------------------------------------------------------
