Garey Barrell <[EMAIL PROTECTED]> made an utterance to the drakelist gang
----------------------------------------------------------------------
The "original" bumpers were the feet for the AC-4 Power Supply. Most
used them to mount the supply into the MS-4 Speaker Cabinet, because
they were there. They are available from McMaster Carr as "Threaded
Rubber Bumpers" for about $6 for 25 pcs. They are also available from
WA9TGT at 2 for $1.
<http://www.wa9tgt.com/index.html>
Or you can find them on E*ay for about $10 for four pcs.
A regular 1/4" long, 6-32 Pan Head machine screw works just as well, for
a lot less money!
I have a 100 KHz crystal, $16 shipped.
73, Garey - K4OAH
Atlanta
Drake 2-B, 4-B & C-Line Service Supplement CDs
<www.k4oah.com>
R. Ton wrote:
"R. Ton" <[EMAIL PROTECTED]> made an utterance to the drakelist gang
----------------------------------------------------------------------
It's a standard 6-32 machine thread in the AC-4. 1/4" screw should
work fine -- these are available in any hardware store. (I'm not
aware of any rubber coating).
73, Rob (KFØRT)
Anyone out there have a source for the screws that hold the MS4 power
supply to the AC4 cabinet? Think the heads are covered with rubber.
If not,how about the size for them?
Also am in need of a 100khz calibrator crystal.
Thanks
Rusty
WB9FIU
----------------------------------------------------------------------
Submissions: [email protected]
Unsubscribe: [EMAIL PROTECTED] - unsubscribe drakelist in body
Hopelessly Lost: [EMAIL PROTECTED] - help in body of message
Zerobeat Web Page: www.zerobeat.net - sponsored by www.tlchost.net
----------------------------------------------------------------------
