Well, many thanks to all for helpful references. I was directed to eBay and purchased apparently NOS for about $1.60 each. I will let all know the results. If this is a fix, will be looking to complete the UV# with a 220 MHz module if available. Also, the 440 receives but no output. So, still some work left.
Incidentally, the email /internet search robots resulted in 12 or so Chinese replies for the IC. The costs ranged from $53, to 87 cents each for a minimum quantity of 100. Most interesting. Again thanks. Will keep all posted on the progress. David Assaf, III W5XU -----Original Message----- From: David [mailto:[email protected]] Sent: Sunday, October 09, 2011 8:40 AM To: '[email protected]' Cc: '[email protected]' Subject: RE: [Drakelist] uvc divider board No, it is the 16 dip plastic package. Even the china references are saying they do not have any! David Assaf, III W5XU -----Original Message----- From: Garey Barrell [mailto:[email protected]] Sent: Friday, October 07, 2011 9:33 PM To: David Cc: [email protected] Subject: Re: [Drakelist] uvc divider board David - If it's a 14 pin DIP package the MC14016 is available from Mouser, Digi-Key and others. It's just a CMOS Quad Analog switch. Google MC14016BCP is the plastic DIP, the MC14016BCPG is the wide temperature version. 73, Garey - K4OAH Glen Allen, VA Drake 2-B, 2-C/2-NT, 4-A, 4-B, C-Line and TR-4/C Service Supplement CDs <www.k4oah.com> David wrote: > > Looking for a MC4016P for a UV3 divider board. This is an obsolete part. Any sources? > > David Assaf, III > > W5XU > ----- No virus found in this message. Checked by AVG - www.avg.com Version: 2012.0.1831 / Virus Database: 2085/4543 - Release Date: 10/07/11 _______________________________________________ Drakelist mailing list [email protected] http://mailman.zerobeat.net/mailman/listinfo/drakelist
