I've never tried this, but couldn't you just clip the leads off of a cap
or resistor from your junk box and solder them on to the end caps of a
regular 8a fuse. You would certainly reflow the inside connection but as
long as you still have continuity when your done, no harm no foul. I
wouldn't do this on spacecraft or life support equipment, but the
filaments of a T4XB I think would be OK. If it fails later, it fails
open, so I don't see any risk. Just make sure you use leads that can
handle 8amps. (there probably is a reason for not doing this, but I
can't think of it).
Bob K6GGO
Greetings,
Trying to find a source for the 8 Amp fuse with pig tails that solders
into the filament string on the T4XB. Can find the fuse but not with
pig tails, any help would be appreciated. Thanks.
73 Gary
_______________________________________________
Drakelist mailing list
[email protected]
http://mailman.zerobeat.net/mailman/listinfo/drakelist
_______________________________________________
Drakelist mailing list
[email protected]
http://mailman.zerobeat.net/mailman/listinfo/drakelist
