Hanks to Curt, KU8L, I have received the MC4016P chips. BGMicro had a zillion of them. Put one in place of the bad one and still no joy. It is locking up on a different frequency. Note the test was after I tried a good divider board from the other unit and it worked fine.
So, does anyone know if a source of extender boards for the UV3? The one needed is to essentially extend the connection of a 22 pin, double sided computer board type socket. After that I can then trouble shoot further. After this is fixed, I will tackle the no output on the 440 board. Many thanks for the help. David Assaf, III W5XU -----Original Message----- From: David Assaf [mailto:[email protected]] Sent: Thursday, October 27, 2011 8:45 AM To: David 3 Subject: Re: MC4016P Have them ordered. Again many thanks for the tip. Will be nice to get this one off the bench. Have more in line. Hopefully it will do the trick. Sent from my iPhone David Assaf, III On Oct 25, 2011, at 10:54, "David 3" <[email protected]> wrote: > > > -----Original Message----- > From: Curt [mailto:[email protected]] > Sent: Monday, October 10, 2011 9:35 AM > To: David > Subject: MC4016P > > Think I got the last ones I used here. Not certain because its been a > while but I see they still have them listed and addable to their > shopping carts. > > Hope this helps..let me know how it goes and if they are not > available, I will look deeper here. > > Curt > KU8L > > http://www.bgmicro.com/ics1028.aspx > ----- No virus found in this message. Checked by AVG - www.avg.com Version: 2012.0.1834 / Virus Database: 2092/4579 - Release Date: 10/27/11 _______________________________________________ Drakelist mailing list [email protected] http://mailman.zerobeat.net/mailman/listinfo/drakelist
