No mention of Vox but I can't see how there would be any if the relay is
picked via a 12volt mod via the Mic PTT. If the rig is generally working OK
(SSB) then I guess it's up to Dale as to the next move. If it was my issue
then I would source an appropriate relay and restore the rig to its "as
built" functionality.
Best regards
JB 

-----Original Message-----
From: Garey Barrell [mailto:[email protected]] 
Sent: Thursday, 29 December 2011 2:37 AM
To: John Brown
Cc: [email protected]; [email protected]
Subject: Re: [Drakelist] strange relay setup for T4X

Possibly.  Dale didn't mention whether the VOX worked or not.  It wouldn't
be that difficult to put 
a fet (2N7000?) in place of the last 6EV7 section to retain VOX.

If the VOX (Semi-Breakin) doesn't work then the 'dit chop' doesn't matter!
Of course the 
transmitter is much less pleasant to operate, at least to me.    :-)

--
73, Garey - K4OAH
St Charles, IL

Drake 2-B, 2-C/2-NT, 4-A, 4-B, C-Line
and TR-4/C Service Supplement CDs
<www.k4oah.com>


John Brown wrote:
>
> I guess there will not be any VOX capability if it is hard wired to the
PTT.
>
> JB
>
> *From:*[email protected]
[mailto:[email protected]] *On Behalf Of 
> *[email protected]
> *Sent:* Wednesday, 28 December 2011 12:15 PM
> *To:* [email protected]
> *Subject:* [Drakelist] strange relay setup for T4X
>
> Put the T4X on the bench today, noticed the relay had been changed out. I
found a sealed relay in 
> place of the open frame relay. The relay was for 12 vdc.. they powered the
relay via a small 
> rectifier and a small filter network,taken from the 12 volt ac feed to the
rig from the AC-4.   
> The Ptt circuit is now 12 vdc at the mic jack. I  tried to follow what was
changed in the PTT 
> wiring really hard to follow as they wove the new wire into the old
harness. I set the rig up with 
> the ac-4, and checked it out. Everything seems to work as it should, T4X
had no trouble tuning to 
> full output.
>      I guess the question is , this mod seems to work fine ,as its done
,is there any thing I 
> should be concerned about using the mod , as to the way the T4X was
originally set up? any one see 
> any pitfalls ?
> thanks
> dale wt4t
>


_______________________________________________
Drakelist mailing list
[email protected]
http://mailman.zerobeat.net/mailman/listinfo/drakelist

Reply via email to