Mark -
Absolutely NO denigration of your modification. Well thought and and perfectly
executed.
Re #1 below, I'm not sure what 'script' is supposed to be??
The multi-switch computer 'Power Center' helps with the multi-station setup. A single strip is a
little cumbersome for more than one station. One approach would be to have one strip for receivers,
and another for just transmitters. Your relay is simpler! :-)
Thanks for sharing and documenting!!
73, Garey - K4OAH
Glen Allen, VA
Drake 2-B, 2-C/2-NT, 4-A, 4-B, C-Line
and TR-4/C Service Supplement CDs
<www.k4oah.com>
Mark Pilant wrote:
Hi Bob/Garey.
I've used the switched strip as well. Unfortunately I find there
are two problems:
1) Finding a place where the script can be conveniently
switched on and off.
2) There are usually more things plugged in which would be
switched than I would like. Which would probably lead
to an over abundance of switched strips :-)
So I opted to do the relay. Relatively cheap from DigiKey (under
$10; without S&H) especially if ordering other parts. Best of all
it is easily reversible if I ever want/need to.
73
- Mark N1VQW
_______________________________________________
Drakelist mailing list
[email protected]
http://mailman.zerobeat.net/mailman/listinfo/drakelist
