Peter, If you have verified continuity through the switch then look at the schematic and you will see there is a 1N270 diode between the output meter control pot and the antenna. If that diode is defective, missing, or has a cold solder joint you will not get any reading.
Ken WA2LBI On Sun, Jan 15, 2012 at 10:34, Peter Ravn <[email protected]> wrote: > ** > When I press and rotate the output meter control on my T4XB, nothing > happens. I have checked the switch and the 68 0hm resistor on it. They are > Ok. > > 73 Peter, OZ8CTH >
_______________________________________________ Drakelist mailing list [email protected] http://mailman.zerobeat.net/mailman/listinfo/drakelist
