Hello Everybody, I would like to use the Drake R8 with a mil transceiver. The transceiver has the PTT which is used also send CW. I have a Elad Switchbox, http://www.woodboxradio.com/download/SwitchBoxManENG_Reducedv1.03.pdf, for that, so I should be fine. If I connect everything according to the Elad manual, the R8 should be protected but would not mute during TX. And I would like to MUTE the R8. The R8 requires ground to receive. So I think to connect the MUTE of the R8 to the PTT connector of the Elad Switchbox and the PTT of the Transceiver. I checked the voltage of the PTT at the transceiver and it is about ten volts. Would I make a damage connecting the PTT of the transceiver to the mute of the R8, or it is the correct way to transceive?
Thanx for reading and 73, Franco iz2oos
_______________________________________________ Drakelist mailing list Drakelist@zerobeat.net http://mailman.zerobeat.net/mailman/listinfo/drakelist