They are in the meter cicuit...and if they are wrong..the plate current will not read correctly...and of course the current on both tubes will not be matched 73, Lee
-----Original Message----- From: Peter Ravn <[email protected]> To: Drakelist <[email protected]> Sent: Tue, Sep 18, 2012 3:11 pm Subject: [Drakelist] TX4B cathode resistors The two cathode resistors in the finals in the TX4B should be 15 ohms each, but R32 is 30 ohms and R33 16 ohms with the finals unplugged, so R32 is definitely bad. The difference in voltages on the cathodes of the two finals is, however, minimal. The voltage across R32 is 0.85 and 0.7 across the R33. What are the causes and consequences of the differences in the cathode resistors? Thanks. OZ8CTH Peter _______________________________________________ Drakelist mailing list [email protected] http://mailman.zerobeat.net/mailman/listinfo/drakelist
_______________________________________________ Drakelist mailing list [email protected] http://mailman.zerobeat.net/mailman/listinfo/drakelist
