Hi,
Are you still using software raid?
Have you tryed out using hardware raid?
The only time i had tryed out drbd with mdraid, well let's say, i never
will try that again, from now on, we only use areca raid cards. Anyway,
software raid it's slow, if you want to do this thing, buy raid
controllers, the best ones are areca, 3ware and lsi it's bad, don't know
all the others.
Cheers,
On 10/23/2009 10:40 PM, Mike Lovell wrote:
exaggerated the problem. when the sync hangs, the drbd module is
almost completely unresponsive. i tried doing a pause-sync and then
resume-sync thinking that it would nudge the module into working but
the commands timeout on talking to the module. i can still cat
/proc/drbd but that is about it until i take down the network
interface and drbd detects the network change. if i then bring back up
the interface, drbd detects it can talk again but then only syncs a
couple of megabytes before stalling again. i have tried every way i
can think of to check the integrity of the network link between the
hosts and everything says they are fine except for during a ping flood
there will be a few out of a couple h
--
Igor Neves<[email protected]>
3GNTW - Tecnologias de Informação, Lda
SIP: [email protected] JID: [email protected]
ICQ: 249075444 MSN: [email protected]
TLM: 00351914503611 PSTN: 00351252377120
_______________________________________________
drbd-user mailing list
[email protected]
http://lists.linbit.com/mailman/listinfo/drbd-user
