gilberto nunes wrote:
Hi folks
I found a missconfiguration here...
Apparently, DRBD do not work properly with bridge devices... ( that is
correct?)
I was use br1 to dedicates device between nodes...
I disable bridge and use 'real' device and now evertything is going
right...
But, to my project here, I really need bridge devices because inside a
VM that I deploy with KVM, I use DRBD too, and the DRBD use a bridge
device use by DRBD on real server....
The IP of br1 on real server is the same range on VM, to communcate with
other VM...
Thanks
*Gilberto Nunes Ferreira*
This may not help, but at least it breaks the silence. :)
I've not used DRBD in a VM, but I do use it between dom0s via a real
switch and I use bridging between a set of VMs. As I've gotten my system
set up, my bridges don't have IPs themselves. In this configuration,
they are essentially just switches... Not addressable devices.
So what I am wondering is; Could your problem be a mis-configuration on
the networking instead of an actual problem with DRBD? To be honest, and
I am no expert, I don't see how the difference between real and virtual
switches/bridges should affect DRBD at all.
Madi
_______________________________________________
drbd-user mailing list
[email protected]
http://lists.linbit.com/mailman/listinfo/drbd-user
