Le 13/09/2010 18:39, Digimer a écrit :
On 10-09-13 12:33 PM, Sam Przyswa wrote:
You need to attach the local disk first, it's currently diskless.
drbdadm attach r0
Ok, I got that:
# drbdadm attach r0
2: Failure: (114) Lower device is already claimed. This usually means it
is *mounted*.
Command 'drbdsetup 2 disk /dev/LVM-1/POSTFIX-2 /dev/LVM-1/meta-1 0
--set-defaults --create-device --on-io-error=detach' terminated with
exit code 10
But the disk *must* be mounted
Sam.
No, it should not be mounted. DRBD expects to use a raw partition as
it's backing device.
So your '/dev/LVM-1/POSTFIX' LV should be unmounted. If you see it in
the output of 'df -h' then that is your problem.
If I umount the /dev/LVM-1/POSTFIX-2 ans restart DRBD I got:
version: 8.3.7 (api:88/proto:86-91)
srcversion: EE47D8BF18AC166BE219757
2: cs:Connected ro:Secondary/Secondary ds:Inconsistent/Inconsistent B
r----
ns:0 nr:0 dw:0 dr:0 al:0 bm:0 lo:0 pe:0 ua:0 ap:0 ep:1 wo:b
oos:20971520
And I can't promote it as primary because it's not UpToDate !
But /dev/LVM-1/POSTFIX-2 is *NOT* a raw partition but *ext3* !
Sam.
_______________________________________________
drbd-user mailing list
[email protected]
http://lists.linbit.com/mailman/listinfo/drbd-user
