Lionel & Felix thank you.
I realized my mistake.
25.03.2011 14:45, Lionel Sausin пишет:
Dear Михаил Евстратов,
You must not bring down the stacked resource, you have must mkfs onto it.
If your stacked resource is /dev/drbd1 then just do:
drbdadm --stacked up r0-U
mkfs.ext3 /dev/drbd1
Lionel Sausin.
Le -10/01/-28163 20:59, Михаил Евстратов a écrit :
Hi!
I have three-node configuration.
(Like this
http://www.howtoforge.com/drbd-8.3-third-node-replication-with-debian-etch)
When I run
drbdadm --stacked down r0-U
and
mkfs.ext3 /dev/drbd0
and run
drbdadm --stacked up r0-U
an error
drbdadm --stacked up r0-U
10: Failure: (119) No valid meta-data signature found.
==> Use 'drbdadm create-md res' to initialize meta-data area. <==
Command 'drbdsetup 10 disk /dev/drbd0 /dev/drbd0 internal
--set-defaults --create-device' terminated with exit code 10
If I run
drbdadm --stacked create-md r0-U
an error
md_offset 536847597568
al_offset 536847564800
bm_offset 536831180800
Found ext3 filesystem
524265236 kB data area apparently used
524249200 kB left usable by current configuration
Device size would be truncated, which
would corrupt data and result in
'access beyond end of device' errors.
You need to either
* use external meta data (recommended)
* shrink that filesystem first
* zero out the device (destroy the filesystem)
Operation refused.
Command 'drbdmeta 10 v08 /dev/drbd0 internal create-md' terminated
with exit code 40
drbdadm create-md r0-U: exited with code 40
Help me please
Mikhail Evstratov
_______________________________________________
drbd-user mailing list
[email protected]
http://lists.linbit.com/mailman/listinfo/drbd-user
_______________________________________________
drbd-user mailing list
[email protected]
http://lists.linbit.com/mailman/listinfo/drbd-user
