On Thu, Jun 23, 2011 at 01:33:05PM -0400, Whit Blauvelt wrote: > The step for today is trying to get IPMI stonith working, using Pacemaker > 1.0.9 and Heartbeat 3.0.2. I've tried configuring external/impi through > DRBD-MC, but all ends up with is a gray box saying Starting ... Not Running, > despite that the various connection settings I've put in are known good. The > logs show it generating a bunch of XML, and no errors, but no success.
Changing some settings, I've finally got some errors logged: c# crm_verify -L -V crm_verify[7185]: 2011/06/23_14:03:41 ERROR: unpack_rsc_op: Hard error - stonith_external_ipmi_ipmi_vm1_start_0 failed with rc=2: Preventing stonith_external_ipmi_ipmi_vm1 from re-starting on vmothership1 crm_verify[7185]: 2011/06/23_14:03:41 WARN: unpack_rsc_op: Processing failed op stonith_external_ipmi_ipmi_vm1_start_0 on vmothership1: invalid parameter (2) crm_verify[7185]: 2011/06/23_14:03:41 ERROR: unpack_rsc_op: Hard error - stonith_external_ipmi_ipmi_vm1_start_0 failed with rc=2: Preventing stonith_external_ipmi_ipmi_vm1 from re-starting on vmothership2 crm_verify[7185]: 2011/06/23_14:03:41 WARN: unpack_rsc_op: Processing failed op stonith_external_ipmi_ipmi_vm1_start_0 on vmothership2: invalid parameter (2) Note to people writing error messages - never say "invalid parameter" without quoting or otherwise specifying the parameter you're rejecting. Or is "(2)" a parameter spec? A message like that is better than nothing ... barely. This stuff has the complexity of a jet plane where a Model T ought to do the job. ; > Whit _______________________________________________ drbd-user mailing list [email protected] http://lists.linbit.com/mailman/listinfo/drbd-user
