Quoting Digimer <[email protected]>:
On 07/19/2011 12:47 PM, [email protected] wrote:
Digimer. Thanks for the help. I went back and partitioned the drive
for lvm and then it didn't show up at all. I removed the partitions and
suddenly everything went according to plan. I'm guessing this just got
everything back to a known state. Not sure. The changes on the first
machine would always show up on the second machine. So, who knows...
Thanks Again.
Ken
Ensure that the rebuilt partitions/LVs are clustered.
Also, *please* setup real fencing ASAP. You *will* corrupt your data
without it.
Best of luck.
Thanks. I'll look into the fencing. I'm using a cluster that was
already up and running but having performance issues as a rough guide.
These are HP machines with ilo cards so I'll look into that method
soon. I am just looking at this cluster as a temp for now to move to
so I can dig into the 'real' cluster. ;)
One small thing remains. I'm sure it isn't a drbd issue though. I
thought I was good to go with everything. All of the commands to
display various lvm data show up on the second node but there is
nothing in the /dev directory. I didn't realize this until I went to
make the file system on the second node. Any advice on where to look
for that info? I'll hit the RH site after lunch.
Thanks again.
Ken Lowther
_______________________________________________
drbd-user mailing list
[email protected]
http://lists.linbit.com/mailman/listinfo/drbd-user
