Hi,
I did the online verifcation, and from the log I can see it is out of sync, so
my question is will drbd automatically resync it after online verification?
Here is my log:
Oct 6 13:07:50 server4 kernel: block drbd3: Starting Online Verify from sector 0
Oct 6 13:14:54 server4 kernel: ata1.00: exception Emask 0x50 SAct 0x0 SErr
0x90a02 action 0xe frozen
Oct 6 13:14:54 server4 kernel: ata1.00: irq_stat 0x00400000, PHY RDY changed
Oct 6 13:14:54 server4 kernel: ata1: SError: { RecovComm Persist HostInt
PHYRdyChg 10B8B }
Oct 6 13:14:54 server4 kernel: ata1.00: cmd
ea/00:00:00:00:00/00:00:00:00:00/a0 tag 0
Oct 6 13:14:54 server4 kernel: res
40/00:54:a4:fc:fb/00:00:1d:00:00/40 Emask 0x50 (ATA bus error)
Oct 6 13:14:54 server4 kernel: ata1.00: status: { DRDY }
Oct 6 13:14:54 server4 kernel: ata1: hard resetting link
Oct 6 13:15:00 server4 kernel: ata1: softreset failed (device not ready)
Oct 6 13:15:00 server4 kernel: ata1: failed due to HW bug, retry pmp=0
Oct 6 13:15:01 server4 kernel: ata1: SATA link up 3.0 Gbps (SStatus 123
SControl 300)
Oct 6 13:15:01 server4 kernel: ata1.00: configured for UDMA/133
Oct 6 13:15:01 server4 kernel: ata1: EH complete
Oct 6 13:15:01 server4 kernel: SCSI device sda: 976773168 512-byte hdwr
sectors (500108 MB)
Oct 6 13:15:01 server4 kernel: sda: Write Protect is off
Oct 6 13:15:01 server4 kernel: SCSI device sda: drive cache: write back
Oct 6 13:26:57 server4 kernel: block drbd3: Out of sync: start=56079768,
size=8 (sectors)
Oct 6 13:26:59 server4 kernel: block drbd3: Out of sync: start=56161688,
size=8 (sectors)
Oct 6 13:43:36 server4 kernel: block drbd3: Online verify done (total 2145
sec; paused 0 sec; 24440 K/sec)
Oct 6 13:43:36 server4 kernel: block drbd3: Online verify found 2 4k block out
of sync!
Oct 6 13:43:36 server4 kernel: block drbd3: conn( VerifyS -> Connected )
Oct 6 13:43:36 server4 kernel: block drbd3: Writing the whole bitmap, due to
failed kmalloc
Oct 6 13:43:36 server4 kernel: block drbd3: helper command: /sbin/drbdadm
out-of-sync minor-3
Oct 6 13:43:36 server4 kernel: block drbd3: helper command: /sbin/drbdadm
out-of-sync minor-3 exit code 0 (0x0)
Oct 6 13:43:36 server4 kernel: block drbd3: 8 KB (2 bits) marked out-of-sync
by on disk bit-map.
Regards
Louis_______________________________________________
drbd-user mailing list
[email protected]
http://lists.linbit.com/mailman/listinfo/drbd-user
