> Hi folks,
>
> I'm a DRBD newbie when it comes to administration, so please bear with
> me a for a second while describing my problem:
>
(...)
>
> - Dedicated gigabit link on eth1 for DRBD sync / replication, speed
> around 100MB/sec using rsync or scp.
(...)
> # drbdsetup /dev/drbd0 show
(...)
> syncer {
> rate 102400k; # bytes/second
(...)
> }
(...)
> /proc/drbd shows: (sorry for the line length)
> # cat /proc/drbd
> version: 8.3.7 (api:88/proto:86-91)
> srcversion: EE47D8BF18AC166BE219757
> 0: cs:SyncSource ro:Primary/Secondary ds:UpToDate/Inconsistent C r----
> ns:48504579 nr:0 dw:9541797 dr:47365371 al:2346 bm:4890 lo:1
> pe:2770 ua:1741 ap:0 ep:1 wo:b oos:3252837352
>
> [>....................] sync'ed: 0.9% (3176596/3205188)M
> finish: 57:25:48 speed: 15,604 (11,448) K/sec
(...)Hm, somethings do not fit together. You configured a rate of 102M (Byte/s) and when you ask the DRBD it tells you that your configured a rate of 11M (Byte/s) Did your show us the /proc/drbd output of the above given config? Greetings, -- Dr. Michael Schwartzkopff Guardinistr. 63 81375 München Tel: (0163) 172 50 98 Fax: (089) 620 304 13
signature.asc
Description: This is a digitally signed message part.
_______________________________________________ drbd-user mailing list [email protected] http://lists.linbit.com/mailman/listinfo/drbd-user
