Hi, how I can deactivate encryption in DRBD resource?
I'm thinking to convert DRBD from primary/primary to active/passive how I need
to modify the configuration files?
Based on your experiences, I have two HP ProLiant DL360 G5 with two HP Smart
Array P400 (512 MB + battery) and Gigabit NIC are HP NC373i, how would you tune
up the configuration file of DRBD?
This are mine /etc/drbd.d/ro.res
resource r0 { protocol C;
startup {
wfc-timeout 15;
degr-wfc-timeout 60;
become-primary-on both;
}
net {
max-buffers 8000;
max-epoch-size 8000;
sndbuf-size 512k;
cram-hmac-alg sha1;
shared-secret "******";
allow-two-primaries;
after-sb-0pri discard-zero-changes;
after-sb-1pri discard-secondary;
after-sb-2pri disconnect;
}
syncer {
rate 150M;
}
on emu1 {
device /dev/drbd0;
disk /dev/cciss/c0d1p1;
address 192.168.50.1:7788;
meta-disk internal;
}
on emu2 {
device /dev/drbd0;
disk /dev/cciss/c0d1p1;
address 192.168.50.2:7788;
meta-disk internal;
}
}
And this are mine /etc/drbd.d/global_common.conf
global { usage-count no;
# minor-count dialog-refresh disable-ip-verification
}
common {
protocol C;
handlers {
pri-on-incon-degr "/usr/lib/drbd/notify-pri-on-incon-degr.sh;
/usr/lib/drbd/notify-emergency-reboot.sh; echo b > /proc/sysrq-trigger ; reboot
-f";
pri-lost-after-sb "/usr/lib/drbd/notify-pri-lost-after-sb.sh;
/usr/lib/drbd/notify-emergency-reboot.sh; echo b > /proc/sysrq-trigger ; reboot
-f";
local-io-error "/usr/lib/drbd/notify-io-error.sh;
/usr/lib/drbd/notify-emergency-shutdown.sh; echo o > /proc/sysrq-trigger ; halt
-f";
# fence-peer "/usr/lib/drbd/crm-fence-peer.sh";
split-brain "/usr/lib/drbd/notify-split-brain.sh [email protected]";
out-of-sync "/usr/lib/drbd/notify-out-of-sync.sh [email protected]";
# before-resync-target "/usr/lib/drbd/snapshot-resync-target-lvm.sh -p
15 -- -c 16k";
# after-resync-target /usr/lib/drbd/unsnapshot-resync-target-lvm.sh;
}
startup {
# wfc-timeout degr-wfc-timeout outdated-wfc-timeout wait-after-sb;
}
disk {
# on-io-error fencing use-bmbv no-disk-barrier no-disk-flushes
# no-disk-drain no-md-flushes max-bio-bvecs
}
net {
# sndâ€buf-size rcvbuf-size timeout connect-int ping-int ping-timeout
max-buffers
# max-epoch-size ko-count allow-two-primaries cram-hmac-alg
shared-secret
# after-sb-0pri after-sb-1pri after-sb-2pri data-integrity-alg
no-tcp-cork
}
syncer {
# rate after al-extents use-rle cpu-mask verify-alg csums-alg
}
}
Thank you very much!
Invita i tuoi amici e Tiscali ti premia! Il consiglio di un amico vale più di
uno spot in TV. Per ogni nuovo abbonato 30 € di premio per te e per lui! Un
amico al mese e parli e navighi sempre gratis: http://freelosophy.tiscali.it/
_______________________________________________
drbd-user mailing list
[email protected]
http://lists.linbit.com/mailman/listinfo/drbd-user
