|
Hi,
I was on the DRBD 8.3.13-2 on Debian Wheezy
I have upgraded my debian on Jessie.
I'm using DRBD 8.4.3 now
I have push my config files to the new version.
And the verify is ok
Every 1.0s: cat
/proc/drbd
Wed Dec 4 14:17:20 2013
version: 8.4.3 (api:1/proto:86-101)
srcversion: 5CF35A4122BF8D21CC12AE2
1: cs:VerifyS ro:Primary/Secondary ds:UpToDate/UpToDate C r---b-
ns:0 nr:0 dw:0 dr:386389712 al:0 bm:0 lo:303 pe:1150 ua:303
ap:0 ep:1 wo:f oos:0
[==>.................] verified: 16.6%
(1907140/2284472)Mfinish: 6:57:51 speed: 77,884 (74,416) want:
68,600 K/sec
2: cs:VerifyS ro:Primary/Secondary ds:UpToDate/UpToDate C r---b-
ns:0 nr:0 dw:0 dr:362704704 al:0 bm:0 lo:208 pe:909 ua:208
ap:0 ep:1 wo:f oos:0
[===>................] verified: 20.7%
(1359152/1713352)Mfinish: 5:25:12 speed: 71,316 (69,856) want:
67,240 K/sec
3: cs:VerifyS ro:Primary/Secondary ds:UpToDate/UpToDate C r---b-
ns:0 nr:0 dw:0 dr:372904220 al:0 bm:0 lo:219 pe:954 ua:219
ap:0 ep:1 wo:f oos:0
[==>.................] verified: 16.0%
(1920308/2284472)Mfinish: 7:16:58 speed: 74,996 (71,820) want:
67,640 K/sec
4: cs:VerifyS ro:Primary/Secondary ds:UpToDate/UpToDate C r---b-
ns:0 nr:0 dw:0 dr:365657892 al:0 bm:0 lo:266 pe:88 ua:266 ap:0
ep:1 wo:f oos:0
[====>...............] verified: 25.1%
(1070708/1427796)Mfinish: 3:38:31 speed: 83,616 (70,424) want:
77,560 K/sec
5: cs:VerifyS ro:Primary/Secondary ds:UpToDate/UpToDate C r-----
ns:0 nr:0 dw:0 dr:393353244 al:0 bm:0 lo:0 pe:0 ua:0 ap:0 ep:1
wo:f oos:0
[=>..................] verified: 13.5%
(2471456/2855592)Mfinish: 8:04:24 speed: 87,064 (75,760) want:
82,680 K/sec
6: cs:VerifyS ro:Primary/Secondary ds:UpToDate/UpToDate C r---b-
ns:0 nr:0 dw:0 dr:352233100 al:0 bm:0 lo:696 pe:69 ua:697 ap:0
ep:1 wo:f oos:0
[=>..................] verified: 12.1%
(2511616/2855592)Mfinish: 10:06:48 speed: 70,636 (67,840) want:
68,160 K/sec
7: cs:VerifyS ro:Primary/Secondary ds:UpToDate/UpToDate C r---b-
ns:0 nr:0 dw:0 dr:340788712 al:0 bm:0 lo:263 pe:522 ua:263
ap:0 ep:1 wo:f oos:0
[===>................] verified: 23.4%
(1094992/1427796)Mfinish: 3:21:07 speed: 92,908 (65,636) want:
76,560 K/sec
8: cs:VerifyS ro:Primary/Secondary ds:UpToDate/UpToDate C r---b-
ns:0 nr:0 dw:0 dr:337781844 al:0 bm:0 lo:129 pe:425 ua:129
ap:0 ep:1 wo:f oos:0
[==========>.........] verified: 57.8%
(241252/571116)Mfinish: 1:05:54 speed: 62,444 (65,056) want:
57,760 K/sec
,
This is a knowed problem ?
Thanks
Matthieu Lejeune
Le 3/12/13 09:39, Matthieu Lejeune a écrit :
Hello
I have a problem when i'm launching a drbdadm verify on my
ressources
This is my config :
root@ifprdstor6b:~# cat /etc/drbd.d/DSA601.res
resource DSA601 {
protocol C;
startup {
wfc-timeout 0;
}
disk {
on-io-error detach;
}
syncer {
rate 400M;
verify-alg md5;
}
on ifprdstor6a {
device /dev/drbd1;
disk /dev/sda;
address 10.13.1.1:7788;
meta-disk internal;
}
on ifprdstor6b {
device /dev/drbd1;
disk /dev/sda;
address 10.13.1.2:7788;
meta-disk internal;
}
}
I have 8 ressources with the same configuration
I'm using Drbd over IB network and this is my network config :
root@ifprdstor6b:~# cat /etc/network/interfaces
# This file describes the network interfaces available on your
system
# and how to activate them. For more information, see
interfaces(5).
# The loopback network interface
auto lo
iface lo inet loopback
# The primary network interface
allow-hotplug eth0
iface eth0 inet static
address 10.12.20.2
netmask 255.255.255.0
network 10.12.20.0
broadcast 10.1.2.255
gateway 10.12.20.254
# dns-* options are implemented by the resolvconf package, if
installed
dns-nameservers 10.1.2.33 10.1.2.34
dns-search lampiris.local
allow-hotplug ib0
iface ib0 inet static
address 10.13.1.2
netmask 255.255.255.0
Now when I start a verify with : drbdadm verify DSA601, it's OK
and the verify complete.
But when I start the verify on the second ressouce with : drbdadm
verify DSA602 it's blocking :
This is the : /proc/drbd
root@ifprdstor6a:~# cat /proc/drbd
version: 8.3.11 (api:88/proto:86-96)
srcversion: F937DCB2E5D83C6CCE4A6C9
1: cs:Connected ro:Primary/Secondary ds:UpToDate/UpToDate C
r-----
ns:0 nr:0 dw:0 dr:88 al:0 bm:0 lo:0 pe:0 ua:0 ap:0 ep:1 wo:f
oos:0
2: cs:VerifyS ro:Primary/Secondary ds:UpToDate/UpToDate C r-----
ns:0 nr:0 dw:0 dr:82296 al:0 bm:0 lo:1 pe:8706 ua:2048 ap:0
ep:1 wo:f oos:0
[>....................] verified: 0.1%
(1713280/1713352)Mfinish: 386277:34:31 speed: 0 (0) want: 409,600
K/sec (stalled)
3: cs:Connected ro:Primary/Secondary ds:UpToDate/UpToDate C
r-----
ns:0 nr:0 dw:0 dr:88 al:0 bm:0 lo:0 pe:0 ua:0 ap:0 ep:1 wo:f
oos:0
4: cs:Connected ro:Primary/Secondary ds:UpToDate/UpToDate C
r-----
ns:0 nr:0 dw:0 dr:88 al:0 bm:0 lo:0 pe:0 ua:0 ap:0 ep:1 wo:f
oos:0
5: cs:Connected ro:Primary/Secondary ds:UpToDate/UpToDate C
r-----
ns:0 nr:0 dw:0 dr:88 al:0 bm:0 lo:0 pe:0 ua:0 ap:0 ep:1 wo:f
oos:0
6: cs:Connected ro:Primary/Secondary ds:UpToDate/UpToDate C
r-----
ns:0 nr:0 dw:0 dr:88 al:0 bm:0 lo:0 pe:0 ua:0 ap:0 ep:1 wo:f
oos:0
7: cs:Connected ro:Primary/Secondary ds:UpToDate/UpToDate C
r-----
ns:0 nr:0 dw:0 dr:88 al:0 bm:0 lo:0 pe:0 ua:0 ap:0 ep:1 wo:f
oos:0
8: cs:Connected ro:Primary/Secondary ds:UpToDate/UpToDate C
r-----
ns:0 nr:0 dw:0 dr:88 al:0 bm:0 lo:0 pe:0 ua:0 ap:0 ep:1 wo:f
oos:0
The ressource 2 is freezed, I can't access to the volume and make
an LVM LV or something else. But I can use the other ressources.
I have this entry on the syslog :
Dec 3 09:39:23 ifprdstor6a kernel: [61078.583849] block drbd2:
[drbd2_worker/3080] sock_sendmsg time expired, ko = 4294957143
Dec 3 09:39:29 ifprdstor6a kernel: [61084.574556] block drbd2:
[drbd2_worker/3080] sock_sendmsg time expired, ko = 4294957142
Dec 3 09:39:31 ifprdstor6a OpenSM[2668]: SM port is down#012
Someone had this problem ? Any solutions
Thank's in advance
Matthieu Lejeune
_______________________________________________
drbd-user mailing list
[email protected]
http://lists.linbit.com/mailman/listinfo/drbd-user
|
