It sounds like there's no IP connectivity between the hosts. Double
check the IP addresses in the resource config file and make sure the
primary can ping the second node and vice versa. You may have an error
in your network configuration file or need a network driver installed.
I'm not familiar with OpenSUSE, so I probably can't help you more than
google can with that part.
The console message says DRBD is configured to wait forever for the DRBD
resource to wake up, so if there's a problem with the network settings
on the second node (or the first node), DRBD will prevent bootup from
continuing.
I have the same problem with typing 'yes' to the console to bypass that
prompt not working on my Ubuntu servers, so I don't know what to do
about that except to set a wfc-timeout in the drbd.conf file.
--
Nelson Hicks
Network Operations
SOCKET
(573) 817-0000 ext. 210
[email protected]
On 12/10/2013 04:17 AM, Michael Dukelsky wrote:
Hi,
I have a 2-node setup (primary-secondary), each node has hardware
RAID1 and one of the partitions is used for drbd. No LVM is used, just
ext4. Everything worked fine until I decided to reinstall the OS on
both nodes. I had some reasons to reinstall instead of upgrading. I
made it first on the second node, then on the first one, so each time
one copy of files was intact and the other node files were restored by
synchronization.
There is a problem now. If I reboot the second node I get the
following at the console:
DRBD's startup script waits for the peer node(s) to appear.
- In case this node was already a degraded cluster before the
reboot the timeout is 0 seconds. [degr-wfc-timeout]
- If the peer was available before the reboot the timeout will
expire after 0 seconds. [wfc-timeout]
(These values are for resource 'r0'; 0 sec -> wait forever)
To abort waiting enter 'yes' [ 222]:
Typing yes changes nothing except "To abort waiting enter 'yes' [
nnn]:" is printed once more. In another console I see
1:r0 WFConnection Secondary/Unknown UpToDate/DUnknown C r-----
And no connection appears. How can I make the nodes to connect?
I use opensuse 12.3 with DRBD module version 8.3.13 and userland
version 8.3.11 installed from the repository.
Best regards,
Michael Dukelsky
_______________________________________________
drbd-user mailing list
[email protected]
http://lists.linbit.com/mailman/listinfo/drbd-user
_______________________________________________
drbd-user mailing list
[email protected]
http://lists.linbit.com/mailman/listinfo/drbd-user
