Hi to all
As a temporary solution, after of copy the "/etc/udev/rules.d/65-drbd.rules"
file of my old server (with drbd 8.4.4 version) to my new server (with
drbd-utils 8.9.1 version), i execute:
shell> pvscan
PV /dev/sda3 VG pve lvm2 [199.50 GiB / 16.00 GiB free]
PV /dev/drbd21 lvm2 [20.00 GiB]
Total: 2 [219.50 GiB] / in use: 1 [199.50 GiB] / in no VG: 1 [20.00 GiB]
It is great see this, but i am not sure if my solution will be free of
problems, i would like to hear a second opinion.
Best regards
Cesar
----- Original Message -----
From: "Cesar Peschiera" <[email protected]>
To: <[email protected]>
Sent: Wednesday, November 26, 2014 3:19 PM
Subject: [DRBD-user] leaked on pvcreate invocation. Parent PID 5335: -bash
Hi to all
Anybody can help me?
- I have a problem with "drbd-utils 8.9.1" version, it was downloaded from
the git and compiled in my Debian Wheezy, the error messages are these:
root@host1:/# pvcreate /dev/drbd21
File descriptor 3 (/usr/share/bash-completion/completions) leaked on
pvcreate invocation. Parent PID 5335: -bash
File descriptor 4 (/usr/share/bash-completion/completions) leaked on
pvcreate invocation. Parent PID 5335: -bash
Physical volume "/dev/drbd21" successfully created
root@host1:/# ll /dev/drbd* -d (i don't see the drbd directory)
drbd11 drbd21
root@host1:/# pvscan
File descriptor 3 (/usr/share/bash-completion/completions) leaked on
pvscan
invocation. Parent PID 5335: -bash
File descriptor 4 (/usr/share/bash-completion/completions) leaked on
pvscan
invocation. Parent PID 5335: -bash
PV /dev/sda3 VG pve lvm2 [199.50 GiB / 16.00 GiB free]
PV /dev/drbd21 lvm2 [20.00 GiB]
Total: 2 [219.50 GiB] / in use: 1 [199.50 GiB] / in no VG: 1 [20.00 GiB]
- At difference of DRBD 8.4.4 version (that was installed in other
servers), i don't have this:
/etc/udev/rules.d/65-drbd.rules
/dev/drbd/
/dev/drbd/by-disk
/dev/drbd/by-disk/(the files that must be within.)
/dev/drbd/by-res
/dev/drbd/by-res/(the files that must be within.)
- Maybe my compilation don't have all the necessary options enabled.
- This was my execution by cli:
shell> mkdir drbd-utils
shell> cd drbd-utils
shell> git clone git://git.linbit.com/drbd-utils.git
shell> cd drbd-utils
shell> git checkout tags/v8.9.1
shell> git checkout -b v8.9.1
shell> ./autogen.sh
shell> dpkg-buildpackage -rfakeroot -b -tc
shell> cd ..
shell> dpkg -iGE *.deb
- And this is the content of the autogen.sh file:
#!/bin/sh
# for those that expect an autogen.sh,
# here it is.
aclocal
autoheader
autoconf
echo "
suggested configure parameters:
# prepare for rpmbuild, only generate spec files
./configure --enable-spec
# or prepare for direct build
./configure --prefix=/usr --localstatedir=/var --sysconfdir=/etc
"
My questions
1) How can i fix it? (please if possible, tell me the commands I have to
run
by CLI.)
2) Can anybody also even correct it in the repo of git?
Best regards
Cesar
_______________________________________________
drbd-user mailing list
[email protected]
http://lists.linbit.com/mailman/listinfo/drbd-user
_______________________________________________
drbd-user mailing list
[email protected]
http://lists.linbit.com/mailman/listinfo/drbd-user
