Are you utilising SSDs? Is the kernel log (dmesg) clean from errors on the backing devices (also mdraid members/backing devices)?
Did you verify the mdraid array consistency and are the array's members in sync? -------- Ursprüngliche Nachricht -------- Von: d tbsky <[email protected]> Gesendet: 18. Mai 2016 18:27:00 MESZ An: Veit Wahlich <[email protected]> CC: [email protected] Betreff: Re: [DRBD-user] drbdadm verify always report oos Hi: I shutdown the vm when I found the strange behavior. so the drbd is resync under idle situation. I try to play with config options and resync about 15 times, still can not get verify report 0 oos. I have about 10 resource which has verify problem. but it's strange that some resources are ok. the largest resource is about 1T and it is ok. the resource I am testing now is only 32G. the host structure is: two sata disk (mdadm raid 1) -> lvm -> drbd the host has ecc ram so the memory is ok. the most confusing part is the resync data is very small, it is only a few kilo bytes and sync done in 1 seconds. I don't know why it can not be synced correctly. I also try to run command "md5sum /dev/drbdX" at both node to check. they are indeed different. _______________________________________________ drbd-user mailing list [email protected] http://lists.linbit.com/mailman/listinfo/drbd-user
