At 10:36 +0200 08.06.2016, Roland Kammerer wrote:
Using a switch is definitely the better idea. If possible, do it like
that.
Otherwise, what I wrote stands: If you manually edit the resource file
of the control volume, it gets overwritten when you eg. add a node or
remove a node. So, as a highly unrecommended hack, you could (but you
really should _not_) add all three nodes and then manually edit the res
file.
Regards, rck
_______________________________________________
drbd-user mailing list
[email protected]
http://lists.linbit.com/mailman/listinfo/drbd-user
Thanks Roland,
but please, modify the DRBD-user-guide-9.0, 5.2 and 5.8 section,
because it misleads.
One more questio, please: it will be sufficient to modify the config
file to restore the nodes or I have to reistall all from scratch? (or
there is a procedure with drbdmanage to correct the problem, as the
nodes already exist?).
Regards,
Michele
--
"""""""""""""""""""""""""""""""""""""""""""""""""""""""""""
MICRO srl
Informatica e Telecomunicazioni - Web services - Web sites
Michele Rossetti
sede legale: via Raffa Garzia 7 09126 Cagliari (Italy)
sede operativa: viale Marconi 222 09131 Cagliari
Ph. +39 070 400240 Fax +39 070 4526207
MKM-REG
Web: http://www.microsrl.com http://www.sardi.it
E-mail: [email protected]
"""""""""""""""""""""""""""""""""""""""""""""""""""""""""""
_______________________________________________
drbd-user mailing list
[email protected]
http://lists.linbit.com/mailman/listinfo/drbd-user
