My 3 node proxmoxcluster with drbd/linstor now is running (linstor 5.02) with the primary
nics at 192.168.2.245 ..,246 ,..253 then i try to add a second nic on the diskfull nodes. This nics are direct connected without a switch. The nics are running well. Iperf show 2.3 GB datarate. |linstor node interface create ||proxmoxn1||data 1||92.168.3.1|| linstor node interface create ||proxmoxn||2||data 1||92.168.3.2| |linstor storage-pool set-property p||roxmoxn1||drbdpool PrefNic data| |linstor storage-pool set-property p||roxmoxn||2||drbdpool PrefNic data| there are some messages about adjusting vm´s. After that i can´t start any vm. drbrdsestup status only shows connecting proxmoxn2, proxmoxn3 |I switch back with | |linstor storage-pool set-property p||roxmoxn1||drbdpool PrefNic default| | linstor storage-pool set-property p||roxmoxn||2||drbdpool PrefNic default| so my vms are running again. How can i add the second interface ? Best regards Martin
_______________________________________________ Star us on GITHUB: https://github.com/LINBIT drbd-user mailing list [email protected] https://lists.linbit.com/mailman/listinfo/drbd-user
