Add DT binding documentation for MIPI DSI Command Mode Panel.
Signed-off-by: Tomi Valkeinen <tomi.valkeinen at ti.com>
Reviewed-by: Archit Taneja <archit at ti.com>
---
.../devicetree/bindings/video/panel-dsi-cm.txt | 26 ++++++++++++++++++++++
1 file changed, 26 insertions(+)
create mode 100644 Documentation/devicetree/bindings/video/panel-dsi-cm.txt
diff --git a/Documentation/devicetree/bindings/video/panel-dsi-cm.txt
b/Documentation/devicetree/bindings/video/panel-dsi-cm.txt
new file mode 100644
index 000000000000..73f422556d4f
--- /dev/null
+++ b/Documentation/devicetree/bindings/video/panel-dsi-cm.txt
@@ -0,0 +1,26 @@
+Generic MIPI DSI Command Mode Panel
+===================================
+
+Required properties:
+- compatible: "panel-dsi-cm"
+
+Optional properties:
+- label: a symbolic name for the panel
+- gpios: panel reset gpio and TE gpio
+
+Required nodes:
+- Video port for DSI input
+
+Example
+-------
+
+lcd0: display {
+ compatible = "tpo,taal", "panel-dsi-cm";
+ label = "lcd0";
+
+ gpios = <&gpio4 6 GPIO_ACTIVE_HIGH>; /* 102, reset */
+
+ lcd0_in: endpoint {
+ remote-endpoint = <&dsi1_out_ep>;
+ };
+};
--
1.8.3.2
