The drm_helper_hpd_irq_event() does dpms control and panel is
initialized and displayed on by it.
So should register TE irq handler(exynos_dsi_te_irq_handler())
beforehand.
Signed-off-by: YoungJun Cho <yj44.cho at samsung.com>
Acked-by: Inki Dae <inki.dae at samsung.com>
Acked-by: Kyungmin Park <kyungmin.park at samsung.com>
---
drivers/gpu/drm/exynos/exynos_drm_dsi.c | 19 ++++++++-----------
1 file changed, 8 insertions(+), 11 deletions(-)
diff --git a/drivers/gpu/drm/exynos/exynos_drm_dsi.c
b/drivers/gpu/drm/exynos/exynos_drm_dsi.c
index 24741d8..ded69df 100644
--- a/drivers/gpu/drm/exynos/exynos_drm_dsi.c
+++ b/drivers/gpu/drm/exynos/exynos_drm_dsi.c
@@ -1143,6 +1143,7 @@ static int exynos_dsi_init(struct exynos_dsi *dsi)
static int exynos_dsi_register_te_irq(struct exynos_dsi *dsi)
{
int ret;
+ int te_gpio_irq;
dsi->te_gpio = of_get_named_gpio(dsi->panel_node, "te-gpios", 0);
if (!gpio_is_valid(dsi->te_gpio)) {
@@ -1157,14 +1158,10 @@ static int exynos_dsi_register_te_irq(struct exynos_dsi
*dsi)
goto out;
}
- /*
- * This TE GPIO IRQ should not be set to IRQ_NOAUTOEN, because panel
- * calls drm_panel_init() first then calls mipi_dsi_attach() in probe().
- * It means that te_gpio is invalid when exynos_dsi_enable_irq() is
- * called by drm_panel_init() before panel is attached.
- */
- ret = request_threaded_irq(gpio_to_irq(dsi->te_gpio),
- exynos_dsi_te_irq_handler, NULL,
+ te_gpio_irq = gpio_to_irq(dsi->te_gpio);
+
+ irq_set_status_flags(te_gpio_irq, IRQ_NOAUTOEN);
+ ret = request_threaded_irq(te_gpio_irq, exynos_dsi_te_irq_handler, NULL,
IRQF_TRIGGER_RISING, "TE", dsi);
if (ret) {
dev_err(dsi->dev, "request interrupt failed with %d\n", ret);
@@ -1195,9 +1192,6 @@ static int exynos_dsi_host_attach(struct mipi_dsi_host
*host,
dsi->mode_flags = device->mode_flags;
dsi->panel_node = device->dev.of_node;
- if (dsi->connector.dev)
- drm_helper_hpd_irq_event(dsi->connector.dev);
-
/*
* This is a temporary solution and should be made by more generic way.
*
@@ -1211,6 +1205,9 @@ static int exynos_dsi_host_attach(struct mipi_dsi_host
*host,
return ret;
}
+ if (dsi->connector.dev)
+ drm_helper_hpd_irq_event(dsi->connector.dev);
+
return 0;
}
--
1.9.0
